Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

new safety caps from Justradios
#16

Yes pretty much it, it is a some sort of breakown voltage.

BTW Mouser carries Lelon and Xicon, the latter has been aound forever.
But they are mostly GP ones.
#17

Did I say Xicon, I was thinking of Xunda brand caps, Xicon makes cheap parts, and it shows in the gauge of wire leads they use, but I don't think that they are inherently bad or fraudulently rated. Xunda caps are garbage, they are the reason the Toshiba DVD player will not power up anymore. Lelon is a notorious crap capacitor brand, a Taiwan brand yet, I have a computer tower with several swollen Lelon caps on the motherboard, why Mouser pedals their trash I do not know. Su'scon is one I have seen fail in LCD monitors quite frequently. Then you have ones with a name that is sort of like a good name brand, but misspelled like Robycon
If you want to know which electrolytics to stay away from, try www.badcaps.net , whenever I find a mystery brand I run a search on that site. You can also try mystery brands of polyester film caps, I did with the TC brand ones some places sell, it seems there is nothing noteworthy about them, at least in a negative way.
Regards
Arran
#18

Just checked my last order of caps from Mouser from about 2 months ago they were all high ripple. Blind pigs finds a acorn. Thanks again David
#19

Thanks for the link to the ceramic safety caps. I keep screwing up and getting the plastic box type with very short leads Icon_sad

They don't seem to carry much in the way of 500v caps at Mouser but Digikey has a nice selection. 10uF @ 500v, 10000 Hrs @ 105°C Nichicon are $1.83: http://www.digikey.com/product-detail/en...ND/3664442 Only $1.44 qty 10+.

That being said, JustRadios has great prices on mica caps and some hard to find stuff like 1W and 2W resistors in the megaOhm range and higher voltage (1000V+) caps.
#20

Thanks for the link, Bob... I need to get to digikey more often. they were the only place that carried the caps I needed for the PS in a battery set who didn't want 35 bucks a piece for them.

I've also ordered some of the ceramic caps from mouser.. along with the caps that were backordered (Space restrictions limits my flexibility)




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco P45-6365 Universal Transformer Instruction Manual
Can anyone guide me to where this may be found?GRG — 03:00 PM
54C Complete Teardown/Rebuild
I don't think that I have encountered a 12Z3 before, curious how it uses one of those but includes a #43, which is a 25 ...Arran — 02:17 PM
HiFi (Chifi) tube amp build - but my own design.
It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM
Philco 71 Code 125
Hello,  I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated.dconant — 07:57 AM
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM

[-]
Who's Online
There are currently 1801 online users. [Complete List]
» 2 Member(s) | 1799 Guest(s)
AvatarAvatar

>