Have just bought backelite 38-12.
Posts: 18,427
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
http://www.ebay.com/itm/1938-Philco-Earl...true&rt=nc
Just bought this backelite Philco 38-12 (wanted it for a while, this one is clean and the cabinet is intact). And I think the price is very reasonable.
Note: the lines on the glass are light, not cracks.
Here's what I wrote to the seller. If after this the radio comes damaged, I will lose my faith in peope  . Seriously.
.......
Now, please do pay attention to instructions below.
This is a backelite radio.
I do not know if you have experience packing old radios, the backelite ones require extra care.
1. make sure nothing is loose inside.
2. if possible turn the tuning knob so the variable capacitor inside has its rotor blades fully inside stator.
3. wrap well in plastic wrap.
4. use a first box to fit the wrapped radio snuggly enough so it does not bounce and tape the box over.
5. use the second box oversized at least two inches in each dimension (2" has to be between EVERY wall of the box and the first box with the radio inside) and fill all these spacing with peanuts, first on the bottom, then sides and then the top. The peanuts have to be ttight enough so not to end up on top and radio on the unprotected bottom due to shaking in delivery.
Remember, the package WILL be dropped and abused, and backelite is easily craked unlike wood.
If it is craked, it goes back. I hope it will not have to. I have just received a radio from a guy who I gave exact instructions which he disregarded, and then blamed UPS when it arrived destroyed (I am in the middle of the case resolution right now). Let's try to avoid that.
Best regards,
Morzh.
PS. I know I sound here as a paranoid nudnik and all...it is better than have another case opened with eBay returning the item.
Posts: 98
Threads: 2
Joined: Jul 2014
City: Eugene, OR
Hey! If you can prevent another vintage radio from being damage why not! The last Bakelite radio I received was very well packaged for which I am still grateful!
Posts: 18,427
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Wow, according to her, it was bought for 6 bucks on a garage sale.
Where do people find garage sales like this one?!
Posts: 98
Threads: 2
Joined: Jul 2014
City: Eugene, OR
No kidding! I love 38 Philcos! Wood or Bakelite doesn't matter. They are great designs and the dials are beautiful!
Posts: 18,427
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Yes, I wanted to complement the 38-15 I have, and the backelite ones are less common. And white plascon is even less common .. hopefully one day it pops up.
Posts: 3,231
Threads: 59
Joined: Apr 2011
City: Lexington, KY
Quote:3. wrap well in plastic wrap.
Did you mean bubble wrap? You might get a broken radio that has several layers of Saran Wrap on it
[Image: http://www.saranbrands.com/i/hp_premium_img.jpg]
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 18,427
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
John
You forgot doube boxing. I did mean plastic. Inside the 1st box. Not Saran, but shipping grade cling wrap.
However she indicated she has ons of bubble so she will use it.
Posts: 2,111
Threads: 373
Joined: Jun 2010
City: Dover, OH
I hope it comes through intact for you! I got a 38-12 this spring at a pinball show, already recapped and working to boot. Best looking bakelite in my whole collection and it performs better than my wood cased 38-12.
No matter where you go, there you are.
Posts: 18,427
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Jayce
I am sure it is backelite that makes it so good!
Posts: 18,427
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I like the looks of this 1938 small radios and 1939 39-7 also.
The 38-15 I have looks really neat.
Posts: 2,263
Threads: 164
Joined: Jan 2013
City: Westland, MI
Mike, you forgot the most important instruction of all. On the outside box in big, bold lettering write..."Please beat the daylights out of this box. I wrote FRAGILE on the last one!" Hope it gets to you intact. Looks very good in the photo. Take care, Gary
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Posts: 18,427
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I wrote that instruction on our device's box when we subjected it to ISTA3 pickup and delivery test.
It survived intact.
Posts: 77
Threads: 24
Joined: Nov 2010
City: Oradell, NJ
One has to pack an item so you feel confident that it will survive intact after rolling the package down a flight of stairs.
Posts: 18,427
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
How 'bout
6 drops from 6 feet, from every side of the of the box.
One drop from 4 feet on a hardwod or metal block size of a curb stone (emulating drop on a curb).
And then vibration. 8 hrs.
Posts: 736
Threads: 26
Joined: Jun 2013
City: Hayward, California
We get lots of boxes with parts in them and thats what FedEx says ....your supposed to pack it so it can survive an 8 foot drop onto a curb. Shows you how they treat the boxes.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
|
| hello david,
I have a similar generator in my collection that features a cast iron, single-cylinder Briggs & Stratt...radiorich — 01:00 AM |
|
under chassis parts locator diagram for 1938 Zenith 9s262
|
| Has anyone gone to the trouble of creating an under chassis parts locator image? Yes, I can identify components by foll...bobloney — 08:57 PM |
|
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
|
| Try looking at this site the book mark is for a old generator that I was given. David https://radionerds.com/index.ph...David — 08:36 PM |
|
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
|
| Hello Everyone,
I am looking for voltage identification for all the pin positions on the socket of a CRV-20130 power su...Tonym4704 — 08:16 PM |
|
Philco P45-6365 Universal Transformer Instruction Manual
|
| Can anyone guide me to where this may be found?GRG — 03:00 PM |
|
54C Complete Teardown/Rebuild
|
| I don't think that I have encountered a 12Z3 before, curious how it uses one of those but includes a #43, which is a 25 ...Arran — 02:17 PM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM |
|
Philco 71 Code 125
|
| Hello,
I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM |
|
Stromberg Carlson 1500 Squeal
|
| And life just keeps getting more complicated.dconant — 07:57 AM |
|
54C Complete Teardown/Rebuild
|
| Hello Roy,
here is this one
sincerely Richardradiorich — 12:45 AM |
|
Who's Online
|
There are currently 2083 online users. [Complete List] » 1 Member(s) | 2082 Guest(s)
|
|
|
|

|