Posts: 1,470
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Guys and girls, As of yet I do not have a cathedral radio in my collection. The closest radios I do have is a Philco 37-10 tombstone and a Philco 16B. If you were going to add one,and only one to your collection what would it be? I want to start looking for one and I need some ideas. Just wish I was able to get to Kutztown but maybe in the spring.Let me know what you guys think. Thanks!
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
There are many good choices.....I would go for something representative.
Either a 20 (possibly Deluxe) or a 90. Possibly a 70.
PS. I were about to add a 16B cathedral but you already have a 16.
Posts: 38
Threads: 17
Joined: Aug 2011
City: Nanuet, NY
Posts: 403
Threads: 40
Joined: Feb 2011
City: McPherson, KS
Posts: 298
Threads: 22
Joined: May 2012
City: Chattanooga
State, Province, Country: TN
I have yet to find one that isn't stupid expensive.
It's not how bad you mess up, it's how well you can recover.
Posts: 3,157
Threads: 59
Joined: Apr 2011
City: Lexington, KY
My suggestions would be a Philco 90, 70, or 20 in that order. I'd lean toward a 90 since it is the iconic representation of the classic cathedral radio, especially since prices are down compared to a few years ago. Look at the gallery photos and see if one style suits you more than another..... there are a lot to choose from.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 38
Threads: 17
Joined: Aug 2011
City: Nanuet, NY
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
We saw that one somewhere, I remember it, 90 with falling leaves cloth.
Posts: 3,157
Threads: 59
Joined: Apr 2011
City: Lexington, KY
Quote:We saw that one somewhere, I remember it, 90 with falling leaves cloth.
Yeah, that was one of the sets John (Rock) snagged at the auction. If it is a 90 then the escutcheon is incorrect, but it looks solid and with some fresh grille cloth and the correct escutcheon it could be made quite presentable.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
(This post was last modified: 09-05-2014, 01:41 PM by Eliot Ness.)
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Yes ecutcheon is slim for 90.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
That's a 77/96/111 escutcheon on that 90. Easily replaced with the correct one, so don't let that stop you...I know that John (Rocklandman) will be offering this 90 at a very good price.
--
Ron Ramirez
Ferdinand IN
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Well, the cloth and the escutcheon match.
Add the chassis and the cabinet, and you can restore the whole thing to a nice 111.
Wait...you want a cathedral
Posts: 3,157
Threads: 59
Joined: Apr 2011
City: Lexington, KY
Yeah, if you like that style I'd jump on this one. It'll be an easy restore; the escutcheon will be relatively easy to find, they're making the grille cloth again, and Rock is a great guy to deal with
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 411
Threads: 42
Joined: Sep 2008
City: Ironton Ohio
I wish the falling leaves pattern were being reproduced so I could properly restore my 96. I don't think I have ever seen that being produced. The original looks like 20 with embroidered leaves so I guess if I could find 20 cloth it wouldn't be hard to replicate.
And I agree with the cathedral a 90 or 70. If not then I personally like the look of the late 18,118b.
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Yeah,
I let John have that one since it wasnt falling apart. Whats the fun in buying if there isnt 50 hours of work to do to it.
Or the bidding went to high but i'll stick to my first story..
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
PT 6 chassis screws size???
|
Hello bridKarl,
that sounds right or maybe 8/32 .
Sincerely Richardradiorich — 01:00 AM |
PT 6 chassis screws size???
|
Have this done except for missing chassis screws.
It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM |
Philco model 38 code 121 not receiving signal.
|
Hello Stormlord,
Well done on rewinding that coil it turned fairly good for your first one.
Sincerely Richardradiorich — 09:12 PM |
Philco model 38 code 121 not receiving signal.
|
Well here it is. It ain't pretty, but hopefully it'll work.
I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM |
Philco 42-345 Restoration/Repair
|
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM |
Philco 42-345 Restoration/Repair
|
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM |
Philco model 38 code 121 not receiving signal.
|
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM |
Testing a speaker and output transformer Trutone A2-G
|
The equivalent of one short turn is basically the same as that of a shorted load.
If it is the primary's turn, then the ...morzh — 03:53 PM |
Testing a speaker and output transformer Trutone A2-G
|
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM |
Philco model 38 code 121 not receiving signal.
|
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM |
Who's Online
|
There are currently 756 online users. [Complete List] » 1 Member(s) | 755 Guest(s)
|
|
|

|