Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

I dont have one yet.....
#1

Guys and girls, As of yet I do not have a cathedral radio in my collection. The closest radios I do have is a Philco 37-10 tombstone and a Philco 16B. If you were going to add one,and only one to your collection what would it be? I want to start looking for one and I need some ideas. Just wish I was able to get to Kutztown but maybe in the spring.Let me know what you guys think. Thanks! Icon_thumbup
#2

There are many good choices.....I would go for something representative.

Either a 20 (possibly Deluxe) or a 90. Possibly a 70.
PS. I were about to add a 16B cathedral but you already have a 16.
#3

John PM sent
#4

probably a 90
#5

I have yet to find one that isn't stupid expensive.

It's not how bad you mess up, it's how well you can recover.
#6

My suggestions would be a Philco 90, 70, or 20 in that order. I'd lean toward a 90 since it is the iconic representation of the classic cathedral radio, especially since prices are down compared to a few years ago. Look at the gallery photos and see if one style suits you more than another..... there are a lot to choose from.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#7

How about this one

[Image: http://i1182.photobucket.com/albums/x455...C_0673.jpg]
#8

We saw that one somewhere, I remember it, 90 with falling leaves cloth.
#9

Quote:We saw that one somewhere, I remember it, 90 with falling leaves cloth.
Yeah, that was one of the sets John (Rock) snagged at the auction. If it is a 90 then the escutcheon is incorrect, but it looks solid and with some fresh grille cloth and the correct escutcheon it could be made quite presentable.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#10

Yes ecutcheon is slim for 90.
#11

That's a 77/96/111 escutcheon on that 90. Easily replaced with the correct one, so don't let that stop you...I know that John (Rocklandman) will be offering this 90 at a very good price. Icon_thumbup

--
Ron Ramirez
Ferdinand IN
#12

Well, the cloth and the escutcheon match.
Add the chassis and the cabinet, and you can restore the whole thing to a nice 111.

Wait...you want a cathedral Icon_lol
#13

Yeah, if you like that style I'd jump on this one. It'll be an easy restore; the escutcheon will be relatively easy to find, they're making the grille cloth again, and Rock is a great guy to deal with Icon_thumbup

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#14

I wish the falling leaves pattern were being reproduced so I could properly restore my 96. I don't think I have ever seen that being produced. The original looks like 20 with embroidered leaves so I guess if I could find 20 cloth it wouldn't be hard to replicate.

And I agree with the cathedral a 90 or 70. If not then I personally like the look of the late 18,118b.
#15

Yeah,
I let John have that one since it wasnt falling apart. Whats the fun in buying if there isnt 50 hours of work to do to it. Icon_lol

Or the bidding went to high but i'll stick to my first story.. Icon_wink

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 866 online users. [Complete List]
» 2 Member(s) | 864 Guest(s)
AvatarAvatar

>