Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Just got my 15x
#1

I have been looking for a long while for a nice philco 15x . One popped up yesterday locally and today went and got . Complete and as far as I can tell has not been messed with looks all factory. Powered it up with variac and amp meter and is working fine, does have a hum . It will receive a full going over for max performance and safety. Cabinet is in real nice shape including finish, it is factory finish and will not refinish. I played it briefly and has plenty of power and bass coming from twin speakers. It has a light above the speaker grill area to light up speaker board which I knew was there from my research on this model. I am real excided about this radio and will be displayed next the very rare Philco 23x  If only I can get my hands on a 15dx. The back cover is intact along with the tube shields. The guy I bought it from said his great grandmother purchased it new back in 1932. Truly a fine example of un touched 15x. All for the price of 125$ What a bargain Icon_wave  Icon_wtf  Icon_crazy  Icon_clap  


Attached Files Image(s)
                   
#2

The grill cloth look,s to be very very close to the Philco 90-70 cloth, may be the same pattern ? I have a bran new piece from radio daze that ive been keeping on hand and now I will be using it I guess. The light blub is missing for the outside grill area and am wondering what size and wattage it is.? I haven't gotten the scamatic out yet to see. But I will soon because I am wanting to get it done asap. Im working on two 16b,s right now and have a zenith console, Atwater cathedral, and another console to refinish  soon.
#3

No, that cloth is not the same as the 70-90 cloth. Somewhat similar, but not the same.

The Radio Daze #86 *might* be somewhat similar to the original. I can't tell for sure because the picture is too dark. Maybe that cloth is that dark, and if so, then it would not be a good choice. In that case, 70/90 cloth would be better.

--
Ron Ramirez
Ferdinand IN
#4

Holy Cow! Nice condition! $125!?! Geeze.
Lived a charmed life until you "rescued" it. :-)

A keeper if I ever saw one. An RF stage, 2 IF stages,
push-pull audio out into dual speakers with
Shadow Meter tuning indicator.

A great 1932-33 "hi-fi" set of its era.

Chuck




Users browsing this thread:
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2235 online users. [Complete List]
» 5 Member(s) | 2230 Guest(s)
AvatarAvatarAvatarAvatar
Avatar

>