Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

15x grill cloth
#1

WHAT WOULD BE A GOOD REPLACEMENT CLOTH FOR 15X. ? Or should I say what does original look like ? Maybe I can find something close. I need a good picture of what I should look like when new. Thanks Fred Taylor. Do you guys think maybe radio daze new pattern for 70-90 cathedral would work ? Icon_think
#2

If it's the same as the 15DX, it looks like this.  https://flic.kr/p/bRtBux

Sort of black with copper and gold metallic threads.
#3

The original pattern was never accurately reproduced.

John O. at the now-defunct Radio Grille Cloth Headquarters came fairly close with his pattern #40. Of course that does you no good now since it is no longer available!

The 70/90 pattern, such as Kenny Richmond's Whiskey Rayon, would work well as a substitute.

http://www.richmonddesignsinc.com/grille...oduct_page

--
Ron Ramirez
Ferdinand IN
#4

Thanks Ron, I went ahead and use the Radio Daze cloth for the 70 and 90 Philco cathedral radios. I had a full piece on hand and will do until something else better comes along 


Attached Files Image(s)
       




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 853 online users. [Complete List]
» 1 Member(s) | 852 Guest(s)
Avatar

>