Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

philco 81 -1933 early --Speaker Grill cloth
#1

 Ok,,were can I get Speaker Grill cloth,,,,I have a original piece that was on there,,,,it looks, close to the Small Herringbone Weave cloth,,,that Richmond Design Inc. has,,,but,,that is not it . Is there someone else out there, whom may have what I looking for. Thank You for all you help and time,,,,Ken
#2

Do you have a picture of it?
#3

Kenneth's cloth may be your best option I think. Check RadioDaze and there are some other folks that sell on ebay you can check.
#4

I think Kenny's Small Herringbone pattern looks fine and I would not hesitate to use it in any of my sets which originally had that pattern.

You have to keep in mind that Radio Grille Cloth Headquarters is gone, out of business...and they won't be back...and we will probably never have such a large selection of cloth patterns available to us ever again.

--
Ron Ramirez
Ferdinand IN
#5

  Well,,Thank you all for the input ,,,,,I will have to go with what Mr. Ron,,says,,,,,I had to hear it from the most educated one's on this subject,,,,Thank You all Again




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 856 online users. [Complete List]
» 1 Member(s) | 855 Guest(s)
Avatar

>