12-22-2015, 05:18 PM
Those values are correct, 8 and 192 ohms. I would replace the 8 with a 10 ohm 1/2 W resistor and the 192 with a 200 ohm 5W resistor.
You could replace the fixed mica capacitors in the IF transformers. There are only 2, one across the primary of the 1st IF and one on a secondary winding of 4th IF transformer. You would have to pull those IF transformers to get to the caps. The Candohm is easier to get at.
You could replace the fixed mica capacitors in the IF transformers. There are only 2, one across the primary of the 1st IF and one on a secondary winding of 4th IF transformer. You would have to pull those IF transformers to get to the caps. The Candohm is easier to get at.
Sean
WØKPX
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
