[klondike98]

So...have been continuing the recap.  An earlier repair did some more creative rewiring on block Cap #12 seen here:

[Image: https://www.dropbox.com/s/3m6h6b9nepffrg....jpg?raw=1]

You can see lug #1 on the cap (closest to the nut) has been removed.  The paper tubular cap seen in the picture is a replacement for the original block cap and would have been internal to the block between lugs 1 & 3.  I did some creative repair of my own to put a new lug #1 in place and rewired the block cap to use lugs #2 & 3 for the internal cap and lug 1 for the tie point.

[Image: https://www.dropbox.com/s/4rp6hmhea6o8cg....jpg?raw=1]

In any event...it all went back together with new resistors as well.  I just can not make those dogbones with the metal ends reproduce right so I just made the wire wrap style dogbones.  

[Image: https://www.dropbox.com/s/y585btyc7zce2q....jpg?raw=1]