08-25-2009, 12:21 AM
OK Gary,
The detector or RF coil needs 12 turns of 38 gauge wire on its primary (the outer winding).
Same precautions apply to this as to the oscillator coil (wind clockwise in relation to solder lugs, closely wound, bake coil prior to rewinding, etc.).
Good luck.
The detector or RF coil needs 12 turns of 38 gauge wire on its primary (the outer winding).
Same precautions apply to this as to the oscillator coil (wind clockwise in relation to solder lugs, closely wound, bake coil prior to rewinding, etc.).
Good luck.
--
Ron Ramirez
Ferdinand IN
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
