[OldRestorer]

Man oh man this $5.00 buy has turned into a heck of a project..

 I bought this at K-town and started working on it 3 days ago.
First thing I found was all speaker wires cut, next was half the sires to the 1st IF were cut and the can was bent to heck. Then all the rubber wiring was bare already, The ECAP was broken off and wires cut, It was full of poop and dead stink bugs, Next I had an open 1st if even after reattaching the wires. When I fixed the 1st if 40Ga wire the radio would still not play. I spent 3.5 hours on the phone with Terry and he was very patient with me,
I yesterday just for giggles, took apart the 2nd IF and half was open.. I reattached the tiny stranded wire and checked the alignment. I could not get signal at 455 so I spent an hour adjusting the IF cans until I got a signal. Mike and I were going over it and finally got stations. 

 I had taken my night pill so I really dont remember the final conversation, :  
I think Mike hung up on me? 

So now I am going to secure the busted up IF can and do a final alignment outside where there is no interference...