1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco-Transitone Auto Radios

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Linear Mode
67 mustang Philco model 7TPZ
Don Lind
Junior Member
**
Posts: 49
Threads: 0
Joined: Jul 2007
City: Denver CO
#2

11-26-2009, 02:07 PM
There is a small clutch between the manual tuning and the tuning mechanism. The clutch is normally engaged. When any button is pushed, a slide bar disengages the clutch so the manual tuning does not load the buttons and the knob does not spin. The clutch is either dirty or out of adjustment. Just examine it and the problem should be obvious. Clean with alcohol and/or adjust by moving the stationary disc closer to the pressure disc.
Find
« Next Oldest | Next Newest »
Thread Closed


Messages In This Thread
67 mustang Philco model 7TPZ - by Guest - 11-19-2009, 01:53 AM
Re: 67 mustang Philco model 7TPZ - by Don Lind - 11-26-2009, 02:07 PM
Re: 67 mustang Philco model 7TPZ - by BILL - 11-28-2009, 01:11 PM
Re: 67 mustang Philco model 7TPZ - by Guest - 12-23-2009, 01:40 AM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM

[-]
Who's Online
There are currently 936 online users. [Complete List]
» 2 Member(s) | 934 Guest(s)
AvatarAvatar

>
  1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco-Transitone Auto Radios