Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
Holy caps Batman!  That has to be the most un-Zenith like underside to a Zenith chassis that I have seen so far! One thing I have always sort of admired about Prewar Zenith radios is that they are usually pretty simple under the chassis. My late friend (who always complained about Philcos using too many caps) could rebuild an average Zenith in fairly short time, even with those belts needing replaced. The only issues he ever had was with the Robot Dials which he said was like taking apart a robot to clean things and replace the tuning belts. Maybe I don't want to find a Spinet after all...
No matter where you go, there you are.
Messages In This Thread
RE: Zenith 10-H-571 "Spinet" - by Jayce - 01-08-2017, 11:22 PM
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
Philco model 38 code 121 not receiving signal.
|
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM |
462ron
|
It’s on the bottom of the homepage of our Philcoradio.com homepage!
Ron462ron — 07:20 AM |
Model 70 Cabinet Trim
|
Steve might have some trim left.
Not sure he is making anything.morzh — 06:12 AM |
Model 70 Cabinet Trim
|
Hello musar,
First all welcome to the forum and yes that is true that steve stopped making trim .
Sincerely Richar...radiorich — 12:13 AM |
Model 70 Cabinet Trim
|
I have recently come into possession of a Model 70. The trim around the base needs to be replaced. If this were years ...musar — 12:07 AM |
philcorepairbench.com - shadow-meter
|
Anyone know of a way to recover these files from the repair bench? Thanks.
fenbach — 11:16 PM |
Philco model 38 code 121 not receiving signal.
|
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM |
Philco model 38 code 121 not receiving signal.
|
A DMM is good enough.
One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM |
Testing a speaker and output transformer Trutone A2-G
|
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now.
Have better volu...murf — 03:43 PM |
Philco model 38 code 121 not receiving signal.
|
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM |
Who's Online
|
There are currently 367 online users. [Complete List] » 1 Member(s) | 366 Guest(s)
|
|
|

|