Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Bendix 0526 AA5 Problem
#1

I'm looking for help with my Bendix 0526 AA5 restore. I replaced all the electrolytic and paper caps, speaker and all 5 tubes. I've been through the alignment several times monitoring the AVC line but all I get is very strong stations and the audio is garbled, sounds like it is detuned. The station at 1500 is somewhere down around 700. My freq monitor says the LO is running very low so I swapped out a resistor and 47pf cap with a small improvement in LO freq. Here is the schematic:

http://www.nostalgiaair.org/Resources/316/M0002316.htm

Any ideas?


Messages In This Thread
Bendix 0526 AA5 Problem - by RodB - 01-27-2017, 08:39 PM
RE: Bendix 0526 AA5 Problem - by KCMike - 01-27-2017, 10:24 PM
RE: Bendix 0526 AA5 Problem - by Mondial - 01-27-2017, 10:47 PM
RE: Bendix 0526 AA5 Problem - by Paul Philco322 - 01-27-2017, 10:52 PM
RE: Bendix 0526 AA5 Problem - by RodB - 01-27-2017, 11:44 PM
RE: Bendix 0526 AA5 Problem - by RodB - 01-27-2017, 11:56 PM
RE: Bendix 0526 AA5 Problem - by Mondial - 01-28-2017, 12:21 AM
RE: Bendix 0526 AA5 Problem - by RodB - 01-28-2017, 10:12 AM
RE: Bendix 0526 AA5 Problem - by Mondial - 01-28-2017, 03:31 PM
RE: Bendix 0526 AA5 Problem - by RodB - 01-28-2017, 04:53 PM
RE: Bendix 0526 AA5 Problem - by RodB - 01-28-2017, 09:34 PM
RE: Bendix 0526 AA5 Problem - by Paul Philco322 - 01-28-2017, 09:38 PM
RE: Bendix 0526 AA5 Problem - by RodB - 01-28-2017, 09:56 PM
RE: Bendix 0526 AA5 Problem - by Paul Philco322 - 01-30-2017, 09:40 PM
RE: Bendix 0526 AA5 Problem - by RodB - 02-21-2017, 04:39 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 70 Cabinet Trim
musar , Well if you have any more questions feel free to post away . Sincerely Richardradiorich — 08:56 PM
Model 70 Cabinet Trim
Although I have not made any cabinets or cabinet parts for a couple of years, I still have some parts left over, includi...Steve Davis — 06:26 PM
philcorepairbench.com - shadow-meter
Thanks Ron.fenbach — 02:43 PM
Model 70 Cabinet Trim
Thank you, Gary. Before making my original post, I had clicked on "Steve Davis Cabinets" only to find that it...musar — 02:25 PM
philco predicta
Welcome to the Phorum, cgl18! I am not your resource for television repair, but lots of friendly help is available here...GarySP — 02:12 PM
Model 70 Cabinet Trim
Welcome to the Phorum, musar! You can send Steve Davis a private message (PM). The site is at the top of the Home page...GarySP — 02:09 PM
Model 70 Cabinet Trim
How do I contact him? The only contact information for him I could find when searching online was a telephone number th...musar — 10:38 AM
philco predicta
Hello, good afternoon, I would like to ask what the possible problem could be if I don't have an image on the screen. I ...cgl18 — 10:19 AM
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM

[-]
Who's Online
There are currently no members online.

>