Posts: 3,157
Threads: 59
Joined: Apr 2011
City: Lexington, KY
The link KCMike posted for dial belts (Adams) is a good one, that's where most people buy their Zenith belts.
Another method is to buy dial belt material from Mark Oppat, cut to size and super glue it together... believe-it-or-not, if you use fresh glue, it works really well:
http://radios.hfhosting.net/product/dial-belt/
Edit: the original belts were a flat woven material. I have some NOS JFD replacement belts but I quit using them because they are so old and dry they were slipping.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
(This post was last modified: 03-14-2017, 08:45 PM by Eliot Ness.)
Messages In This Thread
RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 03-14-2017, 08:42 PM
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
Philco model 38 code 121 not receiving signal.
|
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM |
462ron
|
It’s on the bottom of the homepage of our Philcoradio.com homepage!
Ron462ron — 07:20 AM |
Model 70 Cabinet Trim
|
Steve might have some trim left.
Not sure he is making anything.morzh — 06:12 AM |
Model 70 Cabinet Trim
|
Hello musar,
First all welcome to the forum and yes that is true that steve stopped making trim .
Sincerely Richar...radiorich — 12:13 AM |
Model 70 Cabinet Trim
|
I have recently come into possession of a Model 70. The trim around the base needs to be replaced. If this were years ...musar — 12:07 AM |
philcorepairbench.com - shadow-meter
|
Anyone know of a way to recover these files from the repair bench? Thanks.
fenbach — 11:16 PM |
Philco model 38 code 121 not receiving signal.
|
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM |
Philco model 38 code 121 not receiving signal.
|
A DMM is good enough.
One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM |
Testing a speaker and output transformer Trutone A2-G
|
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now.
Have better volu...murf — 03:43 PM |
Philco model 38 code 121 not receiving signal.
|
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM |
Who's Online
|
There are currently 363 online users. [Complete List] » 1 Member(s) | 362 Guest(s)
|
|
|

|