[morzh]

Mike

If you will be re-clothing the grill, here's what I experienced:

The cloth does not go around the board on the sides: the board has no space in between it's​ sides and the board surrounding​it, so the cloth should be trimmed to the size.
At the bottom it can go around but the original doesn't​.
The only place where it goes over is the beveled top.

The cloth is glued, not stapled.

The board's surface is not smooth and, given the size of the cloth, it does not move freely when you try to stretch it.
If on top of that you are using the fast drying spray glue, you are racing against time.
Be aware.