Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 112B shadow mask?
#2

I took lots of pictures of my 112X but none are very good pics of the mask.

Here's the best one I found (the mask on mine had a crack on the left side):
[Image: https://farm5.staticflickr.com/4767/4016...e1a5_c.jpg]

The mask is a simple enough. I actually planned to have my 112 chassis back out of the radio this weekend so I'll try to get a better picture and some measurements.

BTW - you would either have a model 112 or a 112X - there's no such beast as a 112B AFAIK. The 'B' letter would indicate a baby grand (table top) version -but only starting with 1932 models.
Full notes on what the model letters mean in this tech section article: http://philcoradio.com/phorum/showthread.php?tid=14955


Messages In This Thread
Philco 112B shadow mask? - by dirkbuddy - 04-06-2018, 08:51 PM
RE: Philco 112B shadow mask? - by Nathan Slingerland - 04-06-2018, 08:59 PM
RE: Philco 112B shadow mask? - by dirkbuddy - 04-06-2018, 09:16 PM
RE: Philco 112B shadow mask? - by dirkbuddy - 04-06-2018, 09:25 PM
RE: Philco 112B shadow mask? - by dirkbuddy - 04-13-2018, 07:18 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM

[-]
Who's Online
There are currently no members online.

>