37-650 Issues

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

37-650 Issues

Robbie Roberts
Member

Posts: 147
Threads: 28
Joined: Nov 2005

#15

01-30-2006, 05:12 PM

Ok, here's the latest... Pulled the sub chassis again, tore it down enough to confirm all my connections are right. They are. Replaced the volume control with another, no discernible difference. I did eliminate the buzzing by disconnecting the shadow meter- not sure that affects anything otherwise, however, but since the shadow never appeared, and I am pretty sure the piece which is supposed to make the shadow in the first place is missing, it really doesn't bother me at the moment. (I am of the opinion the wiring to the shadow meter is the buzzing cause- I shrink tubed it due to many broken areas in the wiring: no open spots, but precautionary, and I think it is creating a field of its own.

So, Now all I get is a hum, but no radio activity at all... All the coils have checked good for continuity. What next?

Chuck- Any ideas? Anybody?

Scot

Old Cars, Old Radios, Old Pipes and Young Women... What more is there?

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

37-650 Issues - by Robbie Roberts - 01-27-2006, 07:06 AM

[No subject] - by Steve Chambers - 01-27-2006, 08:01 AM

[No subject] - by Robbie Roberts - 01-27-2006, 12:07 PM

[No subject] - by Steve Chambers - 01-27-2006, 12:21 PM

[No subject] - by Robbie Roberts - 01-27-2006, 12:32 PM

[No subject] - by Robbie Roberts - 01-27-2006, 06:02 PM

[No subject] - by Steve Chambers - 01-27-2006, 06:23 PM

[No subject] - by Robbie Roberts - 01-27-2006, 06:29 PM

[No subject] - by Steve Chambers - 01-27-2006, 06:38 PM

[No subject] - by Robbie Roberts - 01-27-2006, 06:41 PM

[No subject] - by Robbie Roberts - 01-27-2006, 06:51 PM

[No subject] - by Steve Chambers - 01-27-2006, 07:05 PM

[No subject] - by Robbie Roberts - 01-27-2006, 07:44 PM

[No subject] - by Robbie Roberts - 01-27-2006, 09:07 PM

[No subject] - by Robbie Roberts - 01-30-2006, 05:12 PM

[No subject] - by Chuck Schwark - 01-30-2006, 07:53 PM

[No subject] - by Steve Chambers - 01-30-2006, 07:59 PM

[No subject] - by Robbie Roberts - 01-30-2006, 08:02 PM

[No subject] - by Chuck Schwark - 01-30-2006, 08:12 PM

[No subject] - by Robbie Roberts - 01-31-2006, 12:52 AM

[No subject] - by Chuck Schwark - 01-31-2006, 09:57 AM

[No subject] - by Robbie Roberts - 01-31-2006, 11:43 AM

[No subject] - by Robbie Roberts - 01-31-2006, 06:40 PM

[No subject] - by Steve Chambers - 01-31-2006, 08:53 PM

[No subject] - by Robbie Roberts - 02-02-2006, 09:24 AM

[No subject] - by Steve Chambers - 02-02-2006, 05:00 PM

[No subject] - by Chuck Schwark - 02-02-2006, 05:47 PM

[No subject] - by Robbie Roberts - 02-02-2006, 06:24 PM

[No subject] - by Chuck Schwark - 02-02-2006, 07:42 PM

[No subject] - by Robbie Roberts - 02-02-2006, 07:43 PM

[No subject] - by Robbie Roberts - 02-02-2006, 08:36 PM

[No subject] - by Chuck Schwark - 02-02-2006, 10:22 PM

[No subject] - by Robbie Roberts - 02-02-2006, 11:03 PM

[No subject] - by Bill Hutchinson - 02-03-2006, 03:20 PM

[No subject] - by Robbie Roberts - 02-03-2006, 03:26 PM

[No subject] - by Bill Hutchinson - 02-03-2006, 07:08 PM

[No subject] - by Robbie Roberts - 02-04-2006, 08:29 AM

[No subject] - by Robbie Roberts - 02-05-2006, 01:42 AM

[No subject] - by 49Stude63 - 02-05-2006, 11:07 AM

View a Printable Version

Users browsing this thread: 2 Guest(s)

Recent Posts
Philco 42-345 Restoration/Repair
RodB :beerchug:Vlad95 — 10:22 AM
Philco 42-345 Restoration/Repair
Vlad, you nailed it. Swiss and German roots.RodB — 09:54 AM
5U4 vs 5Z4 tubes
Well this is a Hallicrafters SX/9 circa 1936. No real issues so far although I dodged a real bullet with a cap that was...bridkarl — 07:59 AM
5U4 vs 5Z4 tubes
The pinout is the same but the 5U4 has a 3 amp filament, verses 2 amps or less on the 5Z4. I think that the pinout of a ...Arran — 12:04 AM
Philco 42-345 Restoration/Repair
By the way. osanders0311 Take a look here: Dial cord stringing Guides May be here you can fount correct string settin...Vlad95 — 11:15 PM
5U4 vs 5Z4 tubes
5U4 and 5Z4 almost identical. I think nothing happened if you left 5U4 instedad 5Z4 long time. Just heater current 5U4 ...Vlad95 — 11:02 PM
Philco 42-345 Restoration/Repair
Hello Vlad95 , Very Funny ! Sincerely Richardradiorich — 11:01 PM
Philco 42-345 Restoration/Repair
RodB You are European yourself :evil: I'm Canadian for the last 30 years :snowman: But not Yankee :lol: Vlad95 — 10:49 PM
Philco 42-345 Restoration/Repair
The band switch selects different oscillator coils for the band selected. I would look for a bad connection in the switc...RodB — 10:31 PM
Philco 42-345 Restoration/Repair
Hang in there...PaulPaul Philco322 — 09:30 PM

Who's Online

There are currently 1212 online users. [Complete List]
» 2 Member(s) | 1210 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me