[Ron Ramirez]

I had a hard time removing the speaker from the cabinet. Of course, two of the three speaker mounting nuts were rusted to the decorative speaker screws.

Fortunately, a little PB Blaster and some gentle persuasion soon took care of that problem.

I connected the speaker, connected my little 12 foot antenna, plugged the T7-5 into my Variac, slowly brought it up and...

It's Alive!

[Video: https://youtu.be/ZaKu0BDiAG4]

Less than three weeks...not bad after the last project.

[Image: http://www.philcoradio.com/images/phorum...-5_055.jpg]

Of course it isn't finished yet. There is still the matter of the dial pointer, and replacing the dial scale. In addition, the speaker sounds awful - much like a Philco 20. There is a good reason for that...

[Image: http://www.philcoradio.com/images/phorum...-5_054.jpg]

Look, Ma, no spider! And so the voice coil is rubbing the pole piece like crazy. The cone is not in very good shape, either. Looks like this calls for a recone job.

Well, this weekend I'll see what I can do about the dial pointer, in between my other weekend projects. I'm just happy to have this one basically done!