RCA 110K2 Unexpected project
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
I applaud your re-stuffing of the multi section electrolytic filter condenser. For the RCA 18T I am soon going to restore I was very lucky. Antique Electronic Supply had a PERFECT replacement, same capacities, same voltage, same dimensions, even the same tab mounting. ( https://www.tubesandmore.com/products/ca...20101010-f ) Needless to say I have ordered one to replace the one in the set.
Messages In This Thread
RE: RCA 110K2 Unexpected project - by mikethedruid - 06-26-2018, 12:08 AM
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Testing a speaker and output transformer Trutone A2-G
|
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now.
Have better volu...murf — 03:43 PM |
Philco model 38 code 121 not receiving signal.
|
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM |
Philco model 38 code 121 not receiving signal.
|
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM |
Philco model 38 code 121 not receiving signal.
|
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM |
Philco model 38 code 121 not receiving signal.
|
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM |
Philco model 38 code 121 not receiving signal.
|
I've reinstalled the coil. Now IT'S ALIVE!!!!!!
I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM |
Philco model 38 code 121 not receiving signal.
|
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM |
PT 6 chassis screws size???
|
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM |
Philco model 38 code 121 not receiving signal.
|
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM |
Philco model 38 code 121 not receiving signal.
|
Thankyou for the kind words sir.
I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM |
Who's Online
|
There are currently 2773 online users. [Complete List] » 3 Member(s) | 2770 Guest(s)
|
|
|

|