*Solved Minerva Tropic Master model w117 "early"-crackle pop & no vol ****SOLVED
Posts: 184
Threads: 3
Joined: Feb 2018
City: Chesapeake VA
(06-29-2018, 08:10 PM)jcassity Wrote: the 40 ohm power resistor is getting extremely hot still Uhhh that's why it's called a power resistor. Size(wattage) should be at least 2X current, three is better.
463 ma is reading from where? Is that total taken from AC input?
Tube heaters should be drawing 300ma, if significantly higher then there isn't enough resistance in that line. The 25Z6 should also be supplying around 80ma, so a total of 380-400ma would be in ball park. Even if heater string is high, I doubt it has anything to with popping issue.
Tom
Messages In This Thread
RE: Minerva Tropic Master model w117 "EARLY" - by 35Z5 - 06-29-2018, 08:53 PM
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Model 70 Cabinet Trim
|
musar ,
Well if you have any more questions feel free to post away .
Sincerely Richardradiorich — 08:56 PM |
Model 70 Cabinet Trim
|
Although I have not made any cabinets or cabinet parts for a couple of years, I still have some parts left over, includi...Steve Davis — 06:26 PM |
philcorepairbench.com - shadow-meter
|
Thanks Ron.fenbach — 02:43 PM |
Model 70 Cabinet Trim
|
Thank you, Gary. Before making my original post, I had clicked on "Steve Davis Cabinets" only to find that it...musar — 02:25 PM |
philco predicta
|
Welcome to the Phorum, cgl18! I am not your resource for television repair, but lots of friendly help is available here...GarySP — 02:12 PM |
Model 70 Cabinet Trim
|
Welcome to the Phorum, musar! You can send Steve Davis a private message (PM). The site is at the top of the Home page...GarySP — 02:09 PM |
Model 70 Cabinet Trim
|
How do I contact him? The only contact information for him I could find when searching online was a telephone number th...musar — 10:38 AM |
philco predicta
|
Hello, good afternoon, I would like to ask what the possible problem could be if I don't have an image on the screen. I ...cgl18 — 10:19 AM |
Philco model 38 code 121 not receiving signal.
|
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM |
462ron
|
It’s on the bottom of the homepage of our Philcoradio.com homepage!
Ron462ron — 07:20 AM |
Who's Online
|
There are currently no members online. |
|

|