Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1962 Ford Truck AM Pushbutton Radio?
#2

This is a little newer auto radio than what usually I get into . Canada did some different things , I do know that from 1953 into the 1960's Ford did not make a cut out for the radios in there trucks, when A radio was installed the dealer got a templet and cut the dash for the radio, the original ones did not have push buttons ,that's for USA trucks , I've worked on Canadian auto radios and there are differents , I once did a 1955 chevrolet car radio, was very simular to the US Delco ,but it was made by RCA of Canada? They could have installed a push button radio in Canada?, Does your radio have "FOMOCO" on it ? If it does not that still doesn't mean it's not OME for a Canadian truck , do some research with Ford truck owners clubs somewhere out there is your answer ,just keep looking, BILL


Messages In This Thread
1962 Ford Truck AM Pushbutton Radio? - by Guest - 07-16-2010, 09:39 PM
Re: 1962 Ford Truck AM Pushbutton Radio? - by BILL - 07-17-2010, 12:45 PM
Re: 1962 Ford Truck AM Pushbutton Radio? - by Guest - 07-17-2010, 02:21 PM
Re: 1962 Ford Truck AM Pushbutton Radio? - by Guest - 07-19-2010, 07:02 PM
Re: 1962 Ford Truck AM Pushbutton Radio? - by Guest - 07-27-2010, 10:50 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM

[-]
Who's Online
There are currently 948 online users. [Complete List]
» 2 Member(s) | 946 Guest(s)
AvatarAvatar

>