Ron's RCA 6T2 Restoration
Posts: 1,385
Threads: 45
Joined: Nov 2017
City: Menlo Park
State, Province, Country: CA
Understood, Ron.
Especially if the original was mica. However, I was reminded last night that the factory-fitted 6800 MMF cap on my radio was a paper cap on pictures I found of an original chassis - you might experiment here, if you feel so inclined, but your way will certainly work, of course!
The one that is now bugging me is how the antenna trimmer should need such extreme adjustment? But then I rather like understanding this part of restorations.
Cheers, and Season's Greetings,
Ed
I don't hold with furniture that talks.
Messages In This Thread
RE: Ron's RCA 6T2 Restoration - by EdHolland - 12-24-2018, 07:26 AM
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco model 38 code 121 not receiving signal.
|
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM |
Philco model 38 code 121 not receiving signal.
|
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM |
Philco model 38 code 121 not receiving signal.
|
I've reinstalled the coil. Now IT'S ALIVE!!!!!!
I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM |
Philco model 38 code 121 not receiving signal.
|
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM |
PT 6 chassis screws size???
|
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM |
Philco model 38 code 121 not receiving signal.
|
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM |
Philco model 38 code 121 not receiving signal.
|
Thankyou for the kind words sir.
I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM |
PT 6 chassis screws size???
|
Hello bridKarl,
that sounds right or maybe 8/32 .
Sincerely Richardradiorich — 01:00 AM |
PT 6 chassis screws size???
|
Have this done except for missing chassis screws.
It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM |
Philco model 38 code 121 not receiving signal.
|
Hello Stormlord,
Well done on rewinding that coil it turned fairly good for your first one.
Sincerely Richardradiorich — 09:12 PM |
Who's Online
|
There are currently no members online. |
|

|