1. The PHILCO Phorum
  2. Various and Sundry Categories
  3. Test Equipment

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Linear Mode
Calibrating a philco 7001 vtvm
jtauser
Junior Member
**
Posts: 4
Threads: 1
Joined: Aug 2016
City: St. Louis, MO
#2

12-30-2018, 07:19 PM
I realize this is an old thread, but I figured I'd reply.  I finished a 7001 restoration earlier this year that turned out great.

There's really no way to calibrate the AC ranges without an AC calibrator.  I picked up one of these on eBay a few years back that works well-

http://jtauser.com/radios/Fluke%205200A.jpg

It is a Fluke 5200A from the 70's.  It is good for the various frequencies required to calibrate vintage meters.  If you want to just calibrate the meter a 60 Hz using a variac and a good digital AC meter you'll find it won't be too far off.

BTW - if anyone else is doing one of these I painstakingly re-generated the meter scale and printed it on photo paper for my restoration.  I would be willing to barter for this image.

Joe T.
In St. Louis?
Visit us at www.archradioclub.org!

http://www.archradioclub.org/
Find
« Next Oldest | Next Newest »
Thread Closed


Messages In This Thread
Calibrating a philco 7001 vtvm - by KCMike - 08-14-2016, 03:13 PM
RE: Calibrating a philco 7001 vtvm - by jtauser - 12-30-2018, 07:19 PM



Users browsing this thread:
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2184 online users. [Complete List]
» 1 Member(s) | 2183 Guest(s)
Avatar

>
  1. The PHILCO Phorum
  2. Various and Sundry Categories
  3. Test Equipment