Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

ZENITH 6-S-229 REPAIR
#14

Today....the scratchiness of the vol pot is almost gone, it is a dull rubbing sound and not too bad. And....the click of the power switch became nice, loud and tactile.
So.....the pot will be left alone.

Aligned the radio. The IF was spot on but weak, due to at least one filter being aligned. The alignment made it way stronger.
Then the bands and - voila - it is quite active, even police band has three or so stations, two of them in Spanish.
BC has lots of activity with me for the antenna.

And...these Z speakers are something.
This one is small, but out on the bench it makes the whole tabletop vibrate. Booming! Can only imagine what it will sound like when back in the cabinet.

Tomorrow I will put it all back together.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.


Messages In This Thread
ZENITH 6-S-229 REPAIR - by morzh - 05-31-2019, 08:10 PM
RE: ZENITH 6-S-229 REPAIR - by Paul Philco322 - 05-31-2019, 10:39 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 05-31-2019, 11:12 PM
RE: ZENITH 6-S-229 REPAIR - by Chas - 05-31-2019, 11:42 PM
RE: ZENITH 6-S-229 REPAIR - by Paul Philco322 - 06-01-2019, 10:03 AM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-01-2019, 11:19 AM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-05-2019, 11:34 PM
RE: ZENITH 6-S-229 REPAIR - by Eliot Ness - 06-05-2019, 11:54 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-06-2019, 08:32 AM
RE: ZENITH 6-S-229 REPAIR - by Ed Locker - 06-06-2019, 09:27 AM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-06-2019, 11:15 AM
RE: ZENITH 6-S-229 REPAIR - by Eliot Ness - 06-06-2019, 04:03 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-06-2019, 08:47 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-07-2019, 09:31 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-08-2019, 07:41 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-08-2019, 07:49 PM
RE: ZENITH 6-S-229 REPAIR - by Paul Philco322 - 06-08-2019, 09:18 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-08-2019, 10:30 PM
RE: ZENITH 6-S-229 REPAIR - by Ron Ramirez - 06-08-2019, 10:37 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-08-2019, 10:46 PM
RE: ZENITH 6-S-229 REPAIR - by Ron Ramirez - 06-08-2019, 10:51 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-08-2019, 10:58 PM
RE: ZENITH 6-S-229 REPAIR - by Ron Ramirez - 06-08-2019, 11:02 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-08-2019, 11:07 PM
RE: ZENITH 6-S-229 REPAIR - by Ron Ramirez - 06-08-2019, 11:17 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-08-2019, 11:21 PM
RE: ZENITH 6-S-229 REPAIR - by Ron Ramirez - 06-08-2019, 11:31 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-08-2019, 11:35 PM
RE: ZENITH 6-S-229 REPAIR - by Ron Ramirez - 06-08-2019, 11:43 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-09-2019, 11:49 AM
RE: ZENITH 6-S-229 REPAIR - by Eliot Ness - 06-09-2019, 12:00 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-09-2019, 12:51 PM
RE: ZENITH 6-S-229 REPAIR - by Ron Ramirez - 06-09-2019, 02:27 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 06-09-2019, 10:11 PM
Same model, same issue - by Shtterlab - 10-29-2024, 12:59 PM
RE: ZENITH 6-S-229 REPAIR - by morzh - 10-29-2024, 10:14 PM
Shtterlab - by Shtterlab - 10-30-2024, 10:00 AM
RE: ZENITH 6-S-229 REPAIR - by morzh - 10-30-2024, 10:57 AM



Users browsing this thread:
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2292 online users. [Complete List]
» 3 Member(s) | 2289 Guest(s)
AvatarAvatarAvatar

>