Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Ipod in a Philco
#20

Ron Ramirez Wrote:I decided to take some time and put together a partial schematic of the 38-40 showing the Pbpix mod to add a 1/8" stereo jack (see below).

Full credit for this mod goes to Peter G. Balazsy, with his permission. I only redrew a 38-40 schematic below to show how Peter's mod can be used on a 38-40.

Ron - now that I have an operational 40-185 my next todo is to install an aux input for my iPod. I read through the thread you pointed to earlier and spent some time looking at the modified schematic you posted for the 38-40. The self-closing Radio Shack plug seems to make this a fairly simple modification, eliminating the need to add a selector switch to restore the circuit to its original design.

Looking at the schematic for my 40-185, I'm a little bit stuck on exactly where to break the circuit. On which side of cap #38 should i install the jack - where the red dot is or the blue? My theory is that it should be where the red dot is so that the cap provides some protection for the iPod as mentioned on the other forum, but I can't say that I can really defend that scientifically.

Thoughts or advice?

Note from site admin: Sorry, but the photo which was attached to this post is no longer available.


Messages In This Thread
Ipod in a Philco - by Guest - 12-15-2009, 02:50 PM
RE: Ipod in a Philco - by jerryhawthorne - 08-09-2012, 05:44 PM
RE: Ipod in a Philco - by w4rtc - 08-09-2012, 08:24 PM
RE: Ipod in a Philco - by Arran - 08-15-2012, 12:19 AM
RE: Ipod in a Philco - by jerryhawthorne - 08-15-2012, 01:27 AM
RE: Ipod in a Philco - by Tondi007 - 02-08-2013, 01:38 PM
RE: Ipod in a Philco - by Tondi007 - 02-08-2013, 08:49 PM
RE: Ipod in a Philco - by Arran - 02-08-2013, 11:08 PM
RE: Ipod in a Philco - by Eric T - 02-10-2013, 02:28 PM
RE: Ipod in a Philco - by Tondi007 - 02-11-2013, 01:16 PM
RE: Ipod in a Philco - by Ron Ramirez - 02-11-2013, 01:59 PM
RE: Ipod in a Philco - by Eric T - 02-15-2013, 11:19 PM
RE: Ipod in a Philco - by jerryhawthorne - 02-16-2013, 12:11 AM
RE: Ipod in a Philco - by Ron Ramirez - 02-16-2013, 07:47 AM
RE: Ipod in a Philco - by fwmartin2000 - 03-05-2020, 08:43 PM
Re: Ipod in a Philco - by Ron Ramirez - 12-15-2009, 06:22 PM
Re: Ipod in a Philco - by jjbuzard - 12-17-2009, 01:52 PM
Re: Ipod in a Philco - by Music in a bottle - 12-17-2009, 08:35 PM
Re: Ipod in a Philco - by Ron Ramirez - 12-17-2009, 09:43 PM
Re: Ipod in a Philco - by jjbuzard - 12-20-2009, 09:59 PM
Re: Ipod in a Philco - by Guest - 01-16-2010, 07:21 AM
Re: Ipod in a Philco - by philcoradio1234 - 03-10-2010, 07:00 PM
Re: Ipod in a Philco - by jepstr67 - 04-07-2010, 09:28 PM
Re: Ipod in a Philco - by Ron Ramirez - 04-07-2010, 10:08 PM
Re: Ipod in a Philco - by hollowstate - 04-08-2010, 01:00 AM
Re: Ipod in a Philco - by jepstr67 - 04-08-2010, 11:00 AM
Re: Ipod in a Philco - by Ron Ramirez - 04-08-2010, 12:36 PM
Re: Ipod in a Philco - by jepstr67 - 04-08-2010, 05:33 PM
Re: Ipod in a Philco - by Ron Ramirez - 04-09-2010, 02:04 PM
Re: Ipod in a Philco - by Ron Ramirez - 04-09-2010, 02:33 PM
Re: Ipod in a Philco - by Chuck Schwark - 04-09-2010, 03:21 PM
Re: Ipod in a Philco - by Ron Ramirez - 04-09-2010, 04:27 PM
Re: Ipod in a Philco - by jepstr67 - 04-09-2010, 04:33 PM
Re: Ipod in a Philco - by scottwkurth - 12-11-2010, 03:28 PM
Re: Ipod in a Philco - by 7estatdef - 12-11-2010, 04:20 PM
Re: Ipod in a Philco - by Ron Ramirez - 12-11-2010, 05:00 PM
Re: Ipod in a Philco - by scottwkurth - 12-13-2010, 05:48 PM
Re: Ipod in a Philco - by 7estatdef - 12-16-2010, 06:32 PM
Re: Ipod in a Philco - by Texasrocker - 12-19-2010, 03:12 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
philco predicta
The model is the holiday without UHF It has no sound and I don't have an oscilloscope or signal generator.cgl18 — 08:51 PM
Philco model 38 code 121 not receiving signal.
I will definitely check my lead length and wire dressing. Thanks for the ideas.Stormlord5500 — 08:06 PM
Philco model 38 code 121 not receiving signal.
Do make sure that you twist the 3 wires from the chassis to the transformer, and dress away from tubes, especially audio...MrFixr55 — 07:38 PM
Philco model 38 code 121 not receiving signal.
The cone unfortunately got damaged when I removed it. The glue that held the cone to the basket was sloppily applied and...Stormlord5500 — 07:12 PM
Philco model 38 code 121 not receiving signal.
So what was wrong with the original speaker? Was the cone damaged? Unless it's totally hopeless I would put it aside as ...Arran — 05:31 PM
My collection presentation
There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM
Electrolytic restuffing/internals
Bridkarl This specific cap you have is the easiset type to restuff. I usually cut it at the upper border of the depr...morzh — 11:35 AM
philco predicta
Hi CGL18, First off, welcome to the Philco Phorum. I have not worked on a TV for a while but here are some givens: ...MrFixr55 — 08:22 AM
Another amp build - here I go again!
Sweet! I actually have a Dynaco Mark 4 that I had been running with 6L6s with no mods. Seemed to my 14-year-old head a...MrFixr55 — 12:57 AM
PT-6 finished!!
Hi Gang, Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM

[-]
Who's Online
There are currently no members online.

>