Posts: 1,199
Threads: 49
Joined: Oct 2017
City: Allendale, MI
So here's where I'm at. 1 coat of finish lacquer. The flash makes it more red than it is. Also it is darker. Way to easy to get carried away with the toner! Most of the toner was a combination of walnut toners with VanDyke on the sides to get rid of some of the red- it didn't! Not as red as the pics show, but still red. The Nikon seems to like to emphasize red.
Still have a lot to learn about using toners.
EDIT: I changed the pics so that they are closer representation of actual color. I used natural light.
(This post was last modified: 10-06-2019, 08:27 PM by rfeenstra.)
Messages In This Thread
RE: My 16B - by rfeenstra - 10-06-2019, 07:06 PM
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
My collection presentation
|
| There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM |
|
Electrolytic restuffing/internals
|
| Bridkarl
This specific cap you have is the easiset type to restuff.
I usually cut it at the upper border of the depr...morzh — 11:35 AM |
|
philco predicta
|
| Hi CGL18,
First off, welcome to the Philco Phorum. I have not worked on a TV for a while but here are some givens:
...MrFixr55 — 08:22 AM |
|
Another amp build - here I go again!
|
| Sweet!
I actually have a Dynaco Mark 4 that I had been running with 6L6s with no mods. Seemed to my 14-year-old head a...MrFixr55 — 12:57 AM |
|
PT-6 finished!!
|
| Hi Gang,
Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM |
|
Electrolytic restuffing/internals
|
| Look here:
Philco-F676-124
Vlad95 — 08:02 PM |
|
PT-6 finished!!
|
| Well the 35Z3 doesn't have a tap on the tube heater for a pilot light, so in this set they have the dial lamp paralleled...Arran — 06:21 PM |
|
Electrolytic restuffing/internals
|
| Thanks. I think I try to cut this as suggested. I don’t have a lathe, but I do have a tap and die set. I am going to see...bridkarl — 04:46 PM |
|
Another amp build - here I go again!
|
| Hey all! Well, I guess that with what I learned from my last build, it's time to move up the ladder another rung and tak...TV MAN — 04:38 PM |
|
Electrolytic restuffing/internals
|
| There are various ways to handle this, one is to cut near just above that rolled in area is near the bottom, using the r...Arran — 04:36 PM |
|
Who's Online
|
There are currently 372 online users. [Complete List]
» 1 Member(s) | 371 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
