Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Zenith 6-S-1-whatever
#47

I have since learned that the speaker that was in this set is not the correct speaker.

It is part no. 49-152AB. A good friend of mine tells me that speaker is actually used in a 5-R-135. Its field is rated at 2125 ohms, more than double the specified 1000 ohm field of the proper 49-117 speaker.

So, after replacing one tube, some capacitors, all resistors including the Candohm, attempted repair of the 1st IF...it still needs an antenna choke, 2nd (and possibly 1st) IF transformers, an audio output transformer...and possibly a speaker.

Hoo boy.

But I'm committed this far now, so I am going to see this project through to completion.

--
Ron Ramirez
Ferdinand IN


Messages In This Thread
Zenith 6-S-1-whatever - by Ron Ramirez - 11-03-2019, 02:04 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-03-2019, 02:08 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-03-2019, 02:12 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-03-2019, 02:21 PM
RE: Zenith 6-S-1-whatever - by PhilcoJohn - 11-03-2019, 07:20 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-03-2019, 07:39 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-03-2019, 07:46 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-03-2019, 07:49 PM
RE: Zenith 6-S-1-whatever - by KCMike - 11-03-2019, 10:11 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-03-2019, 10:12 PM
RE: Zenith 6-S-1-whatever - by morzh - 11-04-2019, 12:14 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-05-2019, 10:43 PM
RE: Zenith 6-S-1-whatever - by rfeenstra - 11-05-2019, 10:49 PM
RE: Zenith 6-S-1-whatever - by GarySP - 11-05-2019, 11:03 PM
RE: Zenith 6-S-1-whatever - by mikethedruid - 11-05-2019, 11:30 PM
RE: Zenith 6-S-1-whatever - by morzh - 11-06-2019, 10:17 AM
RE: Zenith 6-S-1-whatever - by WyTex - 11-08-2019, 06:52 AM
RE: Zenith 6-S-1-whatever - by OldRestorer - 11-10-2019, 08:35 AM
RE: Zenith 6-S-1-whatever - by radiohenry - 11-11-2019, 12:45 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-13-2019, 07:56 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-13-2019, 08:04 PM
RE: Zenith 6-S-1-whatever - by KCMike - 11-13-2019, 08:25 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-13-2019, 09:39 PM
RE: Zenith 6-S-1-whatever - by Eliot Ness - 11-14-2019, 10:10 AM
RE: Zenith 6-S-1-whatever - by morzh - 11-14-2019, 10:37 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-14-2019, 01:29 PM
RE: Zenith 6-S-1-whatever - by morzh - 11-14-2019, 05:03 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-14-2019, 08:27 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-14-2019, 08:38 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-15-2019, 11:51 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-15-2019, 11:59 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-16-2019, 12:04 AM
RE: Zenith 6-S-1-whatever - by Nathan Slingerland - 11-16-2019, 12:46 AM
RE: Zenith 6-S-1-whatever - by PhilcoJohn - 11-16-2019, 08:26 AM
RE: Zenith 6-S-1-whatever - by 462ron - 11-16-2019, 09:54 AM
RE: Zenith 6-S-1-whatever - by Eliot Ness - 11-16-2019, 10:01 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-16-2019, 10:53 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-16-2019, 11:12 PM
RE: Zenith 6-S-1-whatever - by klondike98 - 11-17-2019, 09:28 AM
RE: Zenith 6-S-1-whatever - by Ed Locker - 11-17-2019, 10:36 AM
RE: Zenith 6-S-1-whatever - by Eliot Ness - 11-17-2019, 10:50 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-17-2019, 11:53 AM
RE: Zenith 6-S-1-whatever - by KCMike - 11-17-2019, 12:46 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-17-2019, 07:57 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-17-2019, 08:22 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-17-2019, 08:26 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-17-2019, 08:36 PM
RE: Zenith 6-S-1-whatever - by Jake Blake - 11-17-2019, 08:51 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-22-2019, 10:46 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-23-2019, 02:29 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-23-2019, 08:51 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-23-2019, 05:07 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-23-2019, 05:24 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-23-2019, 05:33 PM
RE: Zenith 6-S-1-whatever - by Ed Locker - 11-23-2019, 08:01 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-23-2019, 11:04 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-24-2019, 01:50 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-24-2019, 08:51 AM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-24-2019, 02:49 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-24-2019, 03:37 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-24-2019, 10:23 PM
RE: Zenith 6-S-1-whatever - by rfeenstra - 11-24-2019, 10:46 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-24-2019, 11:53 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-25-2019, 10:15 PM
RE: Zenith 6-S-1-whatever - by KCMike - 11-25-2019, 11:17 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-26-2019, 12:44 AM
RE: Zenith 6-S-1-whatever - by Eliot Ness - 11-26-2019, 10:13 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-26-2019, 10:18 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-26-2019, 11:38 PM
RE: Zenith 6-S-1-whatever - by Steve Davis - 11-26-2019, 11:56 PM
RE: Zenith 6-S-1-whatever - by klondike98 - 11-27-2019, 10:54 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-27-2019, 10:08 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM

[-]
Who's Online
There are currently 2713 online users. [Complete List]
» 2 Member(s) | 2711 Guest(s)
AvatarAvatar

>