Philco 570 Gramps Clock

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Philco 570 Gramps Clock

morzh
Odobenus rosmarus

Posts: 16,509
Threads: 572
Joined: Oct 2011
City: Jackson State, Province, Country: NJ

#23

03-12-2020, 10:58 PM

They are sold on both eBay and Amazon.

HIFROM 25pcs M22 Copper Washers Flat Ring Sump Plug Oil Seal Gasket Sealing Fitting Washers

https://www.amazon.com/HIFROM-Copper-Was...204&sr=8-1

Those are M22 with 28mm outer. The 22mm hole is exact fitm

However I would increase the outer by another 2mm making it M22x30. But so far most ones are 22x28. Or 22x39 which is way too much. Then again 22x28 work just fine.

PS. Oh...and I had to remove both rippled and flat washers from under the nut that goes to hold the positive bolt: they got too close to the nut holding the cap to the chassis.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

Philco 570 Gramps Clock - by morzh - 02-01-2020, 10:21 PM

RE: Philco 570 Gramps Clock - by morzh - 02-01-2020, 10:27 PM

RE: Philco 570 Gramps Clock - by morzh - 02-02-2020, 09:36 PM

RE: Philco 570 Gramps Clock - by morzh - 02-09-2020, 09:34 PM

RE: Philco 570 Gramps Clock - by Radioroslyn - 02-09-2020, 10:41 PM

RE: Philco 570 Gramps Clock - by morzh - 02-09-2020, 11:22 PM

RE: Philco 570 Gramps Clock - by Steve Davis - 02-10-2020, 10:14 PM

RE: Philco 570 Gramps Clock - by morzh - 02-10-2020, 10:44 PM

RE: Philco 570 Gramps Clock - by Mike L - 02-13-2020, 04:08 PM

RE: Philco 570 Gramps Clock - by morzh - 02-13-2020, 05:10 PM

RE: Philco 570 Gramps Clock - by morzh - 02-19-2020, 09:36 PM

RE: Philco 570 Gramps Clock - by rfeenstra - 02-19-2020, 09:50 PM

RE: Philco 570 Gramps Clock - by morzh - 03-01-2020, 09:31 PM

RE: Philco 570 Gramps Clock - by morzh - 03-01-2020, 09:40 PM

RE: Philco 570 Gramps Clock - by Brad Winder - 03-05-2020, 10:51 AM

RE: Philco 570 Gramps Clock - by morzh - 03-05-2020, 10:19 PM

RE: Philco 570 Gramps Clock - by KCMike - 03-05-2020, 10:24 PM

RE: Philco 570 Gramps Clock - by morzh - 03-08-2020, 08:50 PM

RE: Philco 570 Gramps Clock - by morzh - 03-12-2020, 07:14 AM

RE: Philco 570 Gramps Clock - by Eliot Ness - 03-12-2020, 12:01 PM

RE: Philco 570 Gramps Clock - by morzh - 03-12-2020, 04:12 PM

RE: Philco 570 Gramps Clock - by Ron Ramirez - 03-12-2020, 08:04 PM

RE: Philco 570 Gramps Clock - by morzh - 03-12-2020, 10:58 PM

RE: Philco 570 Gramps Clock - by morzh - 03-15-2020, 10:20 PM

RE: Philco 570 Gramps Clock - by morzh - 03-22-2020, 11:18 PM

RE: Philco 570 Gramps Clock - by morzh - 03-25-2020, 07:08 PM

RE: Philco 570 Gramps Clock - by morzh - 03-26-2020, 10:53 PM

RE: Philco 570 Gramps Clock - by morzh - 03-27-2020, 08:22 PM

RE: Philco 570 Gramps Clock - by morzh - 03-30-2020, 05:53 PM

RE: Philco 570 Gramps Clock - by KCMike - 03-30-2020, 06:11 PM

RE: Philco 570 Gramps Clock - by morzh - 03-30-2020, 06:25 PM

RE: Philco 570 Gramps Clock - by KCMike - 03-30-2020, 08:27 PM

RE: Philco 570 Gramps Clock - by morzh - 03-30-2020, 09:01 PM

RE: Philco 570 Gramps Clock - by morzh - 03-31-2020, 09:17 PM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-01-2020, 01:00 PM

RE: Philco 570 Gramps Clock - by morzh - 04-01-2020, 01:14 PM

RE: Philco 570 Gramps Clock - by KCMike - 04-01-2020, 01:39 PM

RE: Philco 570 Gramps Clock - by morzh - 04-01-2020, 01:45 PM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-01-2020, 02:42 PM

RE: Philco 570 Gramps Clock - by morzh - 04-01-2020, 04:03 PM

RE: Philco 570 Gramps Clock - by morzh - 04-01-2020, 04:05 PM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-01-2020, 04:28 PM

RE: Philco 570 Gramps Clock - by morzh - 04-01-2020, 06:24 PM

RE: Philco 570 Gramps Clock - by morzh - 04-01-2020, 07:10 PM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-01-2020, 08:56 PM

RE: Philco 570 Gramps Clock - by morzh - 04-01-2020, 09:21 PM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-01-2020, 10:50 PM

RE: Philco 570 Gramps Clock - by John Bartley - 04-02-2020, 08:44 AM

RE: Philco 570 Gramps Clock - by morzh - 04-03-2020, 05:05 PM

RE: Philco 570 Gramps Clock - by morzh - 04-03-2020, 05:12 PM

RE: Philco 570 Gramps Clock - by KCMike - 04-03-2020, 06:49 PM

RE: Philco 570 Gramps Clock - by morzh - 04-03-2020, 07:04 PM

RE: Philco 570 Gramps Clock - by rfeenstra - 04-03-2020, 07:11 PM

RE: Philco 570 Gramps Clock - by morzh - 04-03-2020, 07:43 PM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-04-2020, 11:37 AM

RE: Philco 570 Gramps Clock - by gregb - 04-04-2020, 11:53 AM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-04-2020, 11:59 AM

RE: Philco 570 Gramps Clock - by KCMike - 04-04-2020, 12:03 PM

RE: Philco 570 Gramps Clock - by gregb - 04-04-2020, 03:42 PM

RE: Philco 570 Gramps Clock - by morzh - 04-04-2020, 04:25 PM

RE: Philco 570 Gramps Clock - by gregb - 04-04-2020, 07:04 PM

RE: Philco 570 Gramps Clock - by RodB - 04-04-2020, 07:21 PM

RE: Philco 570 Gramps Clock - by morzh - 04-04-2020, 07:28 PM

RE: Philco 570 Gramps Clock - by morzh - 04-06-2020, 07:12 PM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-07-2020, 01:03 PM

RE: Philco 570 Gramps Clock - by morzh - 04-07-2020, 02:29 PM

RE: Philco 570 Gramps Clock - by morzh - 04-07-2020, 03:12 PM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-07-2020, 05:07 PM

RE: Philco 570 Gramps Clock - by morzh - 04-07-2020, 05:20 PM

RE: Philco 570 Gramps Clock - by morzh - 04-07-2020, 08:41 PM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-08-2020, 09:43 AM

RE: Philco 570 Gramps Clock - by morzh - 04-08-2020, 10:33 AM

RE: Philco 570 Gramps Clock - by Ron Ramirez - 04-08-2020, 12:38 PM

RE: Philco 570 Gramps Clock - by morzh - 04-08-2020, 01:14 PM

RE: Philco 570 Gramps Clock - by morzh - 04-08-2020, 01:22 PM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-08-2020, 01:23 PM

RE: Philco 570 Gramps Clock - by morzh - 04-08-2020, 01:45 PM

RE: Philco 570 Gramps Clock - by morzh - 04-08-2020, 03:31 PM

RE: Philco 570 Gramps Clock - by morzh - 04-08-2020, 05:27 PM

RE: Philco 570 Gramps Clock - by Ron Ramirez - 04-08-2020, 05:51 PM

RE: Philco 570 Gramps Clock - by morzh - 04-08-2020, 09:59 PM

RE: Philco 570 Gramps Clock - by Ron Ramirez - 04-08-2020, 10:13 PM

RE: Philco 570 Gramps Clock - by morzh - 04-08-2020, 10:38 PM

RE: Philco 570 Gramps Clock - by Ron Ramirez - 04-09-2020, 07:16 AM

RE: Philco 570 Gramps Clock - by morzh - 04-09-2020, 08:20 AM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-09-2020, 01:55 PM

RE: Philco 570 Gramps Clock - by morzh - 04-09-2020, 03:07 PM

RE: Philco 570 Gramps Clock - by morzh - 04-09-2020, 10:08 PM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-10-2020, 02:13 PM

RE: Philco 570 Gramps Clock - by morzh - 04-10-2020, 03:32 PM

RE: Philco 570 Gramps Clock - by morzh - 04-11-2020, 03:50 PM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-12-2020, 11:08 AM

RE: Philco 570 Gramps Clock - by morzh - 04-12-2020, 11:58 AM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-12-2020, 12:29 PM

RE: Philco 570 Gramps Clock - by morzh - 04-12-2020, 01:02 PM

RE: Philco 570 Gramps Clock - by RodB - 04-12-2020, 02:27 PM

RE: Philco 570 Gramps Clock - by morzh - 04-12-2020, 02:53 PM

RE: Philco 570 Gramps Clock - by RodB - 04-12-2020, 09:28 PM

RE: Philco 570 Gramps Clock - by Ron Ramirez - 04-12-2020, 10:38 PM

RE: Philco 570 Gramps Clock - by morzh - 04-12-2020, 10:50 PM

RE: Philco 570 Gramps Clock - by Ron Ramirez - 04-13-2020, 07:29 AM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-13-2020, 10:46 AM

RE: Philco 570 Gramps Clock - by morzh - 04-13-2020, 10:58 AM

RE: Philco 570 Gramps Clock - by Ron Ramirez - 04-13-2020, 12:28 PM

RE: Philco 570 Gramps Clock - by Mike L - 04-14-2020, 07:43 PM

RE: Philco 570 Gramps Clock - by Eliot Ness - 04-15-2020, 01:45 PM

RE: Philco 570 Gramps Clock - by RodB - 04-15-2020, 02:02 PM

RE: Philco 570 Gramps Clock - by morzh - 04-15-2020, 02:10 PM

RE: Philco 570 Gramps Clock - by Mike L - 04-16-2020, 11:27 AM

RE: Philco 570 Gramps Clock - by Mike L - 04-16-2020, 11:39 AM

RE: Philco 570 Gramps Clock - by morzh - 04-16-2020, 12:04 PM

RE: Philco 570 Gramps Clock - by WyTex - 04-16-2020, 03:23 PM

RE: Philco 570 Gramps Clock - by morzh - 04-22-2020, 03:23 PM

RE: Philco 570 Gramps Clock - by morzh - 05-02-2020, 11:50 PM

RE: Philco 570 Gramps Clock - by morzh - 05-11-2020, 12:57 PM

RE: Philco 570 Gramps Clock - by morzh - 05-12-2020, 04:19 PM

RE: Philco 570 Gramps Clock - by morzh - 05-12-2020, 06:00 PM

RE: Philco 570 Gramps Clock - by rfeenstra - 05-12-2020, 06:12 PM

RE: Philco 570 Gramps Clock - by morzh - 05-12-2020, 06:35 PM

RE: Philco 570 Gramps Clock - by morzh - 05-12-2020, 06:41 PM

RE: Philco 570 Gramps Clock - by rfeenstra - 05-12-2020, 07:00 PM

RE: Philco 570 Gramps Clock - by morzh - 05-12-2020, 07:20 PM

RE: Philco 570 Gramps Clock - by Eliot Ness - 05-12-2020, 07:52 PM

RE: Philco 570 Gramps Clock - by morzh - 05-12-2020, 07:58 PM

RE: Philco 570 Gramps Clock - by Eliot Ness - 05-12-2020, 08:07 PM

RE: Philco 570 Gramps Clock - by morzh - 05-12-2020, 08:58 PM

RE: Philco 570 Gramps Clock - by morzh - 05-13-2020, 10:54 AM

RE: Philco 570 Gramps Clock - by Eliot Ness - 05-13-2020, 12:14 PM

RE: Philco 570 Gramps Clock - by morzh - 05-20-2020, 12:05 PM

RE: Philco 570 Gramps Clock - by morzh - 06-13-2020, 09:05 PM

View a Printable Version

Users browsing this thread: 3 Guest(s)

Recent Posts
Another amp build - here I go again!
Sweet! I actually have a Dyba Mark 4 that I had been running with 6L6s with no mods. seemed to my 14-year-old head a...MrFixr55 — 12:57 AM
PT-6 finished!!
Hi Gang, Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM
Electrolytic restuffing/internals
Look here: Philco-F676-124 Vlad95 — 08:02 PM
PT-6 finished!!
Well the 35Z3 doesn't have a tap on the tube heater for a pilot light, so in this set they have the dial lamp paralleled...Arran — 06:21 PM
Electrolytic restuffing/internals
Thanks. I think I try to cut this as suggested. I don’t have a lathe, but I do have a tap and die set. I am going to see...bridkarl — 04:46 PM
Another amp build - here I go again!
Hey all! Well, I guess that with what I learned from my last build, it's time to move up the ladder another rung and tak...TV MAN — 04:38 PM
Electrolytic restuffing/internals
There are various ways to handle this, one is to cut near just above that rolled in area is near the bottom, using the r...Arran — 04:36 PM
philco predicta
If you have a television signal generator (a must-have for TV repair) and an oscilloscope (the same), then this problem ...RadioSvit — 04:23 PM
HiFi (Chifi) tube amp build - but my own design.
Thanks Rod for the offer but I don't think those would work. There's some differences in the sizing and mounting holes b...TV MAN — 03:13 PM
philco predicta
Bob Anderson (Bandersontv) on Youtube would be the go-to guy on these. Lots of good videos. I don't know what model you ...TV MAN — 03:02 PM

Who's Online
There are currently no members online.

Login
Username:
Password:	Lost Password?
	Remember me