12-10-2020, 07:52 PM
I'm trying to find a way to remove the paper/wax C307 from the circuit. Problem is, it's the farthest-most component behind the band switch.
Without disassembling the whole thing, I can't seem to find a way.
I mean, I could even leave it there if I manage to cut it off, and I could use an alternate ground location for the replacement.
But I can't seem to have big enough access to it to allow for cutting it out.
Anyone has tricks on how to do that?
It's connected to pin 6 of the 6BA6 and serve as screen rf bypass... What wrong would it do to not recap?
Without disassembling the whole thing, I can't seem to find a way.
I mean, I could even leave it there if I manage to cut it off, and I could use an alternate ground location for the replacement.
But I can't seem to have big enough access to it to allow for cutting it out.
Anyone has tricks on how to do that?
It's connected to pin 6 of the 6BA6 and serve as screen rf bypass... What wrong would it do to not recap?
-Mars
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
