[Steve A]

Forgot to include a pic of the underside-yes, lots of room under there! Considering how crowded some radio chassis are that I've looked at on line, this seems wide open.  Since I'm new to this, to those who have worked on 6-S-52's does anything seem missing?                        


     

And here's my initial take on the capacitors I will need to order to recap it (I included the original specs versus the appropriate ones to order for comparison.) I did not include any micas. This is the first schematic I have ever reviewed (attached-courtesy of Nostalgia Air). If anyone is willing to look, did I get any wrong? Also, what resistors if any should be replaced as a matter of course early on? Thank you in advance!

C2     .05 MMFD   200 V              3 needed                              .047 mfd 630v axial
C6    .001 MMFD  600 V              2                                          .001 mfd 630v axial
C7    .02 MMFD   400 V               1                                         .0022 mfd 630v axial
C8   .02 MMFD   600 V                1                                         .0022 mfd 630v axial
C9   .1   MMFD   400 V                2                                         .1 mfd 630v axial
C11   .1 MMFD  200 V                 1                                         .1 mfd 630v axial
C14   .1 MMFD  600 V                 1                                         .1 mfd 630v axial
C15   .0036 MMFD  600 V           1                                          .033 mfd 630v axial
Electrolytic:
C16   8 uF   450 V                     1                                           10 mfd 450v axial
C17   8  uF   450 V                    1                                           10 mfd 450v axial
C18   10 uF  25V                       1                                           10 mfd 50v axial