Stromberg-Carlson 320-T

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Stromberg-Carlson 320-T

klondike98
Phorum Moderator

Posts: 5,170
Threads: 274
Joined: Nov 2012
City: Wilsonville State, Province, Country: OR

#19

05-04-2021, 11:58 PM

OK this set is working, including the "tone" control. I have yet to align it, the volume control is scratchy and needs work and there is some general static but it is picking up our local am station and our weather and tide broadcast. Beerchug

The bias cell was replaced with a C battery (mainly because I had a C battery holder in my drawer of miscellaneous stuff). There was a nice place on the chassis to mount it without drilling new holes. I'll do the aligning and some more cleaning on the chassis and knobs etc. The metal springs in the knobs were rusty and it was incredibly difficult to get the knobs off in the first place. It took a lot of WD-40 and patience. After that, its time to start working on the table/cabinet.

[Image: https://www.dropbox.com/s/7rh7y6cwha8zyy....jpg?raw=1]

Cheers,
Bob
[Image: https://www.dropbox.com/s/5m63ib99yfx2eg....jpg?raw=1]
Bob's Restorations Web Page

Website Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

Stromberg-Carlson 320-T - by klondike98 - 04-15-2021, 10:19 PM

RE: Stromberg-Carlson 320-T - by radiorich - 04-15-2021, 11:22 PM

RE: Stromberg-Carlson 320-T - by OZ4 - 04-16-2021, 10:34 AM

RE: Stromberg-Carlson 320-T - by Chas - 04-16-2021, 12:07 PM

RE: Stromberg-Carlson 320-T - by klondike98 - 04-16-2021, 12:54 PM

RE: Stromberg-Carlson 320-T - by mikethedruid - 04-16-2021, 01:33 PM

RE: Stromberg-Carlson 320-T - by klondike98 - 04-16-2021, 01:55 PM

RE: Stromberg-Carlson 320-T - by Arran - 04-16-2021, 09:27 PM

RE: Stromberg-Carlson 320-T - by klondike98 - 04-16-2021, 09:49 PM

RE: Stromberg-Carlson 320-T - by Arran - 04-17-2021, 01:55 AM

RE: Stromberg-Carlson 320-T - by klondike98 - 04-17-2021, 02:37 AM

RE: Stromberg-Carlson 320-T - by klondike98 - 04-22-2021, 04:34 PM

RE: Stromberg-Carlson 320-T - by Eliot Ness - 04-23-2021, 02:56 PM

RE: Stromberg-Carlson 320-T - by klondike98 - 04-25-2021, 08:13 PM

RE: Stromberg-Carlson 320-T - by klondike98 - 05-02-2021, 11:07 PM

RE: Stromberg-Carlson 320-T - by Eliot Ness - 05-03-2021, 10:32 AM

RE: Stromberg-Carlson 320-T - by morzh - 05-03-2021, 10:39 AM

RE: Stromberg-Carlson 320-T - by klondike98 - 05-03-2021, 09:35 PM

RE: Stromberg-Carlson 320-T - by klondike98 - 05-04-2021, 11:58 PM

RE: Stromberg-Carlson 320-T - by RodB - 05-05-2021, 09:30 AM

RE: Stromberg-Carlson 320-T - by morzh - 05-05-2021, 09:32 AM

RE: Stromberg-Carlson 320-T - by Eliot Ness - 05-05-2021, 10:59 AM

RE: Stromberg-Carlson 320-T - by klondike98 - 05-05-2021, 01:23 PM

RE: Stromberg-Carlson 320-T - by klondike98 - 12-31-2021, 10:25 PM

RE: Stromberg-Carlson 320-T - by klondike98 - 01-04-2022, 10:06 PM

RE: Stromberg-Carlson 320-T - by klondike98 - 01-17-2022, 12:55 PM

RE: Stromberg-Carlson 320-T - by Brad Winder - 01-18-2022, 12:51 PM

RE: Stromberg-Carlson 320-T - by Eliot Ness - 01-18-2022, 02:11 PM

RE: Stromberg-Carlson 320-T - by Paul Philco322 - 01-18-2022, 03:32 PM

RE: Stromberg-Carlson 320-T - by klondike98 - 01-19-2022, 05:26 PM

RE: Stromberg-Carlson 320-T - by klondike98 - 01-21-2022, 01:08 PM

RE: Stromberg-Carlson 320-T - by klondike98 - 01-30-2022, 02:24 PM

RE: Stromberg-Carlson 320-T - by Paul Philco322 - 01-30-2022, 02:26 PM

RE: Stromberg-Carlson 320-T - by klondike98 - 05-30-2022, 09:41 PM

RE: Stromberg-Carlson 320-T - by klondike98 - 01-11-2023, 03:49 PM

View a Printable Version

Users browsing this thread: 3 Guest(s)

Recent Posts
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM

Who's Online
There are currently no members online.

Login
Username:
Password:	Lost Password?
	Remember me