Recapped My Predicta Tandem, I don't know what to do
Posts: 70
Threads: 9
Joined: Feb 2018
City: paramus, nj
Bob thank you for following up. No I haven't tried to adjust the horizontal slug. I was afraid to change anything like that. My assumption was if it worked before it should again if I don't mess with it. I will look up the adjustment. I have the copulates coming in the mail. You said one of them controls the horizontal frequency so maybe replacing it would fix it?
What do you think caused my blank white screen? I went from the poor screen I had to a non responsive white screen.
Messages In This Thread
RE: Recapped My Predicta Tandem, I don't know what to do - by apERNA1985 - 01-05-2022, 11:22 PM
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
Philco 71 Code 125
|
| Technically, that's C-. B- is chassis ground. The resistor between chassis ground and the HV center tap makes the HV c...MrFixr55 — 11:24 PM |
|
54C Cabinet Refinish
|
| hello Roy,
I’d follow Arran’s suggestion and use automotive gasket material, which I keep around for situations like th...radiorich — 10:22 PM |
|
Philco 71 Code 125
|
| This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM |
|
Philco 71 Code 125
|
| Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM |
|
54C Cabinet Refinish
|
| Roy;
Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM |
|
Philco 71 Code 125
|
| Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM |
|
Philco 71 Code 125
|
| I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM |
|
Philco 45-6365 Universal IFT Instruction Manual
|
| The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM |
|
Stromberg Carlson 1500 Squeal
|
| Hello Rob,
I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM |
|
My Atwater Kent 84
|
| Well getting around to restoring my AK84. Mike was a big part in me being able to snatch this one a few years ago. I won...462ron — 10:57 AM |
|
Who's Online
|
There are currently 1833 online users. [Complete List]
» 1 Member(s) | 1832 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
