The list of my radio & TV collection!
Posts: 1,474
Threads: 98
Joined: Jul 2012
City: Poughkeepsie, N.Y.
There are nothing and I mean nothing that comes close to the RCA radios of this era. Nice radio I have several RCA radios of these years. An RCA 9K2, RCA 810K, RCA C11-1, RCA 110K, RCA 214, RCA 8T, RCA 5U. Also a RCA 816K, a RCA 812K, all exceptional radios far better than the Zenith brand and far better than the ummm Philco brand. (sorry Ron and the website) but the RCA brand radios are so much better. The 9K radio you have seemed to pick up so many radio stations across the dial. I bet it is very much the same as my RCA 9K2. Mine just has a extra band. Very sensitive bandwith. Thanks for posting your 9K radio. 
(political content removed by admin)
Messages In This Thread
RE: The list of my radio & TV collection! - by PhilcoJohn - 02-11-2022, 08:15 PM
Users browsing this thread: 30 Guest(s)
|
|
Recent Posts
|
|
Philco 71 Code 125
|
| This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM |
|
Philco 71 Code 125
|
| Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM |
|
54C Cabinet Refinish
|
| Roy;
Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM |
|
Philco 71 Code 125
|
| Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM |
|
Philco 71 Code 125
|
| I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM |
|
Philco 45-6365 Universal IFT Instruction Manual
|
| The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM |
|
Stromberg Carlson 1500 Squeal
|
| Hello Rob,
I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM |
|
My Atwater Kent 84
|
| Well getting around to restoring my AK84. Mike was a big part in me being able to snatch this one a few years ago. I won...462ron — 10:57 AM |
|
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
|
| The engine is a B&S 23 inch cast Iron holds 2 quarts of oil. The Generator is a 4 pole 1800 rpm mine was made in 195...David — 10:51 AM |
|
Philco 45-6365 Universal IFT Instruction Manual
|
| Dale: Modified topic as suggested. It is not for a specific project. I found it in a box of stuff I recently purchased...GRG — 10:34 AM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
