Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 60
#22

Today nothing is happening with the radio. I decided to take a close look at #25 second IF transformer and found nothing wrong. After putting it back together I still had no sound not even static.
So I jumped the gun and replaced mica cap #13 blue, brown, yellow the parts list names it .00011uf so I replaced it with 100pf. Then I got a shock from resistor#10 (forgot to discharge electrolytics) 51K That's when I see the resistor has been cooking. Is that because of the 100pf or I have a short someplace?
Thank you for all your help, Ralph


Messages In This Thread
Philco 60 - by Ralph - 12-29-2021, 11:34 AM
RE: Philco 60 - by Radioroslyn - 12-29-2021, 12:56 PM
RE: Philco 60 - by Ralph - 12-29-2021, 07:29 PM
RE: Philco 60 - by Radioroslyn - 12-29-2021, 08:43 PM
RE: Philco 60 - by Ralph - 01-31-2022, 08:13 AM
RE: Philco 60 - by Radioroslyn - 01-31-2022, 09:22 AM
RE: Philco 60 - by Ralph - 01-31-2022, 04:19 PM
RE: Philco 60 - by Radioroslyn - 01-31-2022, 04:58 PM
RE: Philco 60 - by sk373a@gmail.com - 02-01-2022, 10:06 AM
RE: Philco 60 - by Lewiss - 02-02-2022, 02:21 PM
RE: Philco 60 - by Ralph - 02-03-2022, 11:10 AM
RE: Philco 60 - by Lewiss - 02-03-2022, 06:22 PM
RE: Philco 60 - by Ralph - 02-04-2022, 04:40 PM
RE: Philco 60 - by Radioroslyn - 02-04-2022, 05:27 PM
RE: Philco 60 - by Ralph - 02-04-2022, 05:59 PM
RE: Philco 60 - by Ralph - 02-18-2022, 07:40 PM
RE: Philco 60 - by Lewiss - 02-21-2022, 02:37 PM
RE: Philco 60 - by mikethedruid - 02-21-2022, 07:22 PM
RE: Philco 60 - by Ralph - 02-24-2022, 05:12 PM
RE: Philco 60 - by mikethedruid - 02-24-2022, 10:25 PM
RE: Philco 60 - by Mondial - 02-25-2022, 04:07 PM
RE: Philco 60 - by Ralph - 02-25-2022, 06:48 PM
RE: Philco 60 - by Ralph - 03-12-2022, 01:07 PM
RE: Philco 60 - by klondike98 - 03-12-2022, 01:16 PM
RE: Philco 60 - by Ralph - 03-12-2022, 01:26 PM
RE: Philco 60 - by klondike98 - 03-12-2022, 05:47 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco Model 38-7: what caps & resistors do fail typically?
Since you stated earlier, you have a console 38-7XX.  They also had a 38-7T (table), and 38-7CS (chairside).  A very nic...GarySP — 01:18 PM
Part numbers to model cross
That I wouldn't know, but sometimes the radio document itself shows one, same as the capacitor cans' etc pinouts.morzh — 12:46 PM
Part numbers to model cross
Thank you morzh, that is exactly what I was looking for. Now , is there some where that shows pinouts for Philco power ...Jim Dutridge — 11:37 AM
Restoration of the Canadian General Electric A-87
Thanks for your help Michael. In fact, this video is only an intermediate result. Later I had to apply another tinting l...RadioSvit — 09:01 AM
Restoration of the Canadian General Electric A-87
Great job on the cabinet. PS. In the US notation, "kenotron" refers to specific type of tubes; we call re...morzh — 08:24 AM
Part numbers to model cross
This document has at least some tables of models and parts used. Example: Choke 32-7572, used in 604 radio. Search f...morzh — 08:19 AM
Restoration of the Canadian General Electric A-87
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM
Restoration of the Canadian General Electric A-87
Well... While the varnish is drying up, I started repairing the chassis... Of course I started by replacing the pa...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM

[-]
Who's Online
There are currently 1282 online users. [Complete List]
» 2 Member(s) | 1280 Guest(s)
AvatarAvatar

>