03-06-2022, 03:34 PM
As far as the 20 mfd cap, the + is to the speaker and the - to the bakelite block. That lug where the + is soldered is also where #1 in the photo attaches to the speaker connection.
#2 on the photo goes to the speaker connection and then continues on to Pin 1 of 80 tube. I’m assuming then that 1 and 2 are the 8/8 portion of the electrolytic.
#3 goes to Pin 4 of the 78 tube. That is also where the - connection for the 16 mfd electrolytic, Part 52, is currently attached. Is that the + ground connection for the 10 mfd that NostagiaRadioTime was referring too?
#2 on the photo goes to the speaker connection and then continues on to Pin 1 of 80 tube. I’m assuming then that 1 and 2 are the 8/8 portion of the electrolytic.
#3 goes to Pin 4 of the 78 tube. That is also where the - connection for the 16 mfd electrolytic, Part 52, is currently attached. Is that the + ground connection for the 10 mfd that NostagiaRadioTime was referring too?
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
