Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Westinghouse N-202
#1

Took the initial look at this set.  The schematic is a bit problematic.  N-202 is not listed in Riders or other sources but after searching around apparently the M102/M111 model is similar and found in Riders..  It has an error which has been corrected by Leigh Bassett and which he has kindly provided

As received:
[Image: https://www.dropbox.com/s/hiolz1i9gtai6e....jpg?raw=1]
[Image: https://www.dropbox.com/s/ie32kd5bg21mzc....jpg?raw=1]
[Image: https://www.dropbox.com/s/nf3z152sf391mt....jpg?raw=1]

The set looks relatively unscathed from previous repairs.  It will need to be stripped pretty far down since much of the wire is the crumbling insulation of the mid 40's and the tuning cap grommets are all but gone as well.  One of the bolts holding the tuning cap down is missing and that has caused it to twist a bit making the dial string bind so a restring will be in order when the tuning cap comes off.

As I looked it over, here's a component I had not seen before:
[Image: https://www.dropbox.com/s/lyx5ra47bcixcm....jpg?raw=1]

When I find it on the schematic it looks like its a pair of 60picofarad capacitors, C17A and B on the schematic.  A close look and some testing shows the center mounting bracket is ground and there are a set of dielectrics and connection on each side of the bracket.  Interesting.
More later...


Messages In This Thread
Westinghouse N-202 - by klondike98 - 03-29-2022, 08:11 PM
RE: Westinghouse N-202 - by captainclock1988 - 03-30-2022, 10:37 AM
RE: Westinghouse N-202 - by klondike98 - 03-30-2022, 04:42 PM
RE: Westinghouse N-202 - by GarySP - 03-30-2022, 05:01 PM
RE: Westinghouse N-202 - by klondike98 - 04-03-2022, 10:14 PM
RE: Westinghouse N-202 - by klondike98 - 05-06-2022, 09:54 PM
RE: Westinghouse N-202 - by Mondial - 05-06-2022, 10:31 PM
RE: Westinghouse N-202 - by captainclock1988 - 05-07-2022, 03:01 AM
RE: Westinghouse N-202 - by RodB - 05-07-2022, 08:44 AM
RE: Westinghouse N-202 - by klondike98 - 05-07-2022, 11:57 AM
RE: Westinghouse N-202 - by RodB - 05-07-2022, 01:35 PM
RE: Westinghouse N-202 - by klondike98 - 05-07-2022, 10:11 PM
RE: Westinghouse N-202 - by klondike98 - 05-14-2022, 09:29 PM
RE: Westinghouse N-202 - by RodB - 05-14-2022, 10:28 PM
RE: Westinghouse N-202 - by Chas - 05-15-2022, 10:01 AM
RE: Westinghouse N-202 - by klondike98 - 05-15-2022, 04:36 PM
RE: Westinghouse N-202 - by GarySP - 05-15-2022, 05:45 PM
RE: Westinghouse N-202 - by klondike98 - 05-15-2022, 07:00 PM
RE: Westinghouse N-202 - by Arran - 05-15-2022, 09:29 PM
RE: Westinghouse N-202 - by klondike98 - 05-16-2022, 12:54 PM
RE: Westinghouse N-202 - by klondike98 - 05-23-2022, 07:47 PM
RE: Westinghouse N-202 - by MrFixr55 - 05-23-2022, 09:17 PM
RE: Westinghouse N-202 - by klondike98 - 05-23-2022, 11:06 PM
RE: Westinghouse N-202 - by klondike98 - 05-25-2022, 09:22 PM
RE: Westinghouse N-202 - by GarySP - 05-25-2022, 10:06 PM
RE: Westinghouse N-202 - by radiorich - 05-25-2022, 11:50 PM
RE: Westinghouse N-202 - by klondike98 - 05-30-2022, 10:03 PM
RE: Westinghouse N-202 - by MrFixr55 - 05-31-2022, 07:18 AM
RE: Westinghouse N-202 - by klondike98 - 06-02-2022, 09:47 PM
RE: Westinghouse N-202 - by GarySP - 06-03-2022, 09:13 AM
RE: Westinghouse N-202 - by Paul Philco322 - 06-03-2022, 04:36 PM
RE: Westinghouse N-202 - by klondike98 - 06-13-2022, 10:43 PM
RE: Westinghouse N-202 - by MrFixr55 - 06-13-2022, 11:25 PM
RE: Westinghouse N-202 - by klondike98 - 06-15-2022, 07:03 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
5U4 vs 5Z4 tubes
Well this is a Hallicrafters SX/9 circa 1936. No real issues so far although I dodged a real bullet with a cap that was...bridkarl — 07:59 AM
5U4 vs 5Z4 tubes
The pinout is the same but the 5U4 has a 3 amp filament, verses 2 amps or less on the 5Z4. I think that the pinout of a ...Arran — 12:04 AM
Philco 42-345 Restoration/Repair
By the way. osanders0311 Take a look here: Dial cord stringing Guides May be here you can fount correct string settin...Vlad95 — 11:15 PM
5U4 vs 5Z4 tubes
5U4 and 5Z4 almost identical. I think nothing happened if you left 5U4 instedad 5Z4 long time. Just heater current 5U4 ...Vlad95 — 11:02 PM
Philco 42-345 Restoration/Repair
Hello Vlad95 , Very Funny ! Sincerely Richardradiorich — 11:01 PM
Philco 42-345 Restoration/Repair
RodB You are European yourself   :evil: I'm Canadian for the last 30 years  :snowman: But not Yankee  :lol: Vlad95 — 10:49 PM
Philco 42-345 Restoration/Repair
The band switch selects different oscillator coils for the band selected. I would look for a bad connection in the switc...RodB — 10:31 PM
Philco 42-345 Restoration/Repair
Hang in there...PaulPaul Philco322 — 09:30 PM
Philco 42-345 Restoration/Repair
The thrill is gone again, thought I was close to being done with it. Well Friday it was receiving broadcast, Saturday mo...osanders0311 — 07:47 PM
Help with Supreme 599
Iam getting closer to fixing it. I bumped Up the tranny voltage to get 5v on the 80 tube. I gan get the needle to move ...daveone23 — 03:41 PM

[-]
Who's Online
There are currently no members online.

>