Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Atwater-Kent Original Service Data
#18

Hi John, I also have a Victrola model VV-XX, SN 107314 from about 1912-13. It also works fine. I have a few hundred old 78 records to play on it. I also lucked out, and bought out the boxes of 78 needles from a record store when I was in my 20s, 4 boxes of 500 needles each, so I have plenty, so I can change the needle every 20 plays or so to save my records.My mother and I used to go to the Salvation Army when I was a young kid, and buy old 78 records. The 10 inch were 10 cents each, and the 12" were 15 cents. Over the years we bought several hundred in many different genres. This is what my Victrola looks like. (Exact same model, same condition, but this is not my machine)
[Image: https://64.media.tumblr.com/3b352c26c756...415c7d.jpg]


Messages In This Thread
RE: Atwater-Kent Original Service Data - by RodB - 06-11-2022, 08:47 AM
RE: Atwater-Kent Original Service Data - by mikethedruid - 06-12-2022, 12:28 AM
RE: Atwater-Kent Original Service Data - by RodB - 06-18-2022, 08:16 PM
RE: Atwater-Kent Original Service Data - by RodB - 06-19-2022, 08:44 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM

[-]
Who's Online
There are currently no members online.

>