Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Silvertone 7057 Audio "Cross-Talk" Problem?
#2

Hello from Pittsburgh! I was so happy to see your post as I just acquired the same unit. It's re-capped and the radio works. I have the schematics, but am curious if you've ever come across an owner's manual. Also:

Did you solve the crosstalk issue? I'd be happy to check for that on my end.

Mine did not come with its mic Icon_sad. I'm hoping to find one. Do you know how it connects? I was guessing the recording socket, but all of those connectors seem to be populated.

Also, do you know if the motor has a ground wire running to it? I found a wire from the motor detached at its other end and am wondering if it came off of the rear ground connection.

Sorry for so many questions, I'm just thrilled to have found another owner. I'm happy to help on my end, too, if you're working on yours. Thanks!


Messages In This Thread
RE: Silvertone 7057 Audio "Cross-Talk" Problem? - by slbradio - 11-14-2022, 10:02 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM

[-]
Who's Online
There are currently 946 online users. [Complete List]
» 2 Member(s) | 944 Guest(s)
AvatarAvatar

>