Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

CoRadio Help
#13

Does the static occur only when turning he tuning knob or is the static constant?

Does another radio located in the same location and plugged into the same outlet do the same thing?

Ohm the antenna coil (primary and secondary).

Another trick is to touch the stator terminal of the RF Amp section of the tuning cap with a long wire.
The section with smaller plates is the oscillator section. Don't touch that one. If you get a clearer signal, then troubleshoot the RF Section. You may have an open RF transformer coil (antenna coil). You may have an open secondary in the 1st IF transformer. I had that happen to me on a 1940 Mantola battery portable.


I previously said that most AA6 radios have very similar schematics. This one has a glaring difference, in the capacitive coupling between the converter and the RF amplifier, and the lack of a tuned circuit between the two.
You likely have the correct tubes in the correct sockets, otherwise, the radio wouldn't play at all.

"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8
"Let us begin to do good"- St. Francis

Best Regards, 

MrFixr55


Messages In This Thread
CoRadio Help - by mister_big77 - 01-12-2023, 10:26 PM
RE: CoRadio Help - by Radioroslyn - 01-12-2023, 10:52 PM
RE: CoRadio Help - by Radioroslyn - 01-13-2023, 10:00 AM
RE: CoRadio Help - by mister_big77 - 01-13-2023, 10:18 AM
RE: CoRadio Help - by RodB - 01-13-2023, 10:48 AM
RE: CoRadio Help - by mister_big77 - 01-13-2023, 10:49 PM
RE: CoRadio Help - by RodB - 01-14-2023, 11:06 AM
RE: CoRadio Help - by mister_big77 - 01-16-2023, 01:11 AM
RE: CoRadio Help - by MrFixr55 - 01-17-2023, 05:37 AM
RE: CoRadio Help - by mister_big77 - 01-17-2023, 10:10 AM
RE: CoRadio Help - by MrFixr55 - 01-17-2023, 05:33 PM
RE: CoRadio Help - by mister_big77 - 01-18-2023, 02:29 PM
RE: CoRadio Help - by MrFixr55 - 01-18-2023, 04:12 PM
RE: CoRadio Help - by mister_big77 - 01-19-2023, 11:14 PM
RE: CoRadio Help - by MrFixr55 - 01-20-2023, 06:55 AM
RE: CoRadio Help - by mister_big77 - 01-21-2023, 08:45 PM
RE: CoRadio Help - by MrFixr55 - 01-22-2023, 01:01 AM
RE: CoRadio Help - by mister_big77 - 01-22-2023, 02:31 AM
RE: CoRadio Help - by Arran - 01-23-2023, 06:23 AM
RE: CoRadio Help - by MrFixr55 - 01-23-2023, 07:07 AM
RE: CoRadio Help - by Arran - 01-23-2023, 08:59 PM
RE: CoRadio Help - by mister_big77 - 01-23-2023, 09:47 PM
RE: CoRadio Help - by MrFixr55 - 01-24-2023, 06:31 PM
RE: CoRadio Help - by mister_big77 - 01-24-2023, 08:30 PM
RE: CoRadio Help - by mister_big77 - 01-24-2023, 10:01 PM
RE: CoRadio Help - by MrFixr55 - 01-25-2023, 02:11 AM
RE: CoRadio Help - by mister_big77 - 01-25-2023, 11:04 AM
RE: CoRadio Help - by mister_big77 - 01-25-2023, 11:38 AM
RE: CoRadio Help - by MrFixr55 - 01-29-2023, 09:46 PM
RE: CoRadio Help - by mister_big77 - 01-29-2023, 10:56 PM
RE: CoRadio Help - by MrFixr55 - 01-30-2023, 07:06 PM
RE: CoRadio Help - by mister_big77 - 01-30-2023, 11:23 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM

[-]
Who's Online
There are currently 946 online users. [Complete List]
» 2 Member(s) | 944 Guest(s)
AvatarAvatar

>