05-31-2023, 03:30 PM
Installed more caps and resistors. Pretty well done, now working on that phono input and speaker OPT.
The phono input isn't wired in the schematic as I indicated previously. Will post revision later.
Drilled out the rivets on the speaker without drilling the cone. Figured out better to use a very large drill bit, and eat the rim off to the level of the OPT mount surface, instead of drilling thru the rivet.
Will wire it up another day. Holes line up perfectly.
The phono input isn't wired in the schematic as I indicated previously. Will post revision later.
Drilled out the rivets on the speaker without drilling the cone. Figured out better to use a very large drill bit, and eat the rim off to the level of the OPT mount surface, instead of drilling thru the rivet.
Will wire it up another day. Holes line up perfectly.
