Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Power cord specifications for 52-T1612
#16

@Chas, @MrFixr55

I'm really enjoying the side thread about all the wonderful TV shows from my youth, so keep them coming.  It brings a great big smile to my face (more below).

With regards to the main topic (replacement cord).  I was not so much concerned about authenticity as I was about not damaging the pins, with regards to a new cord.  If I can find a period appropriate cord, that would be great, but I'm OK with something that will fit properly, not damage the pins and will work reliably.

That said, here is a photo of the pin configuration with the back cover removed.

   

Several things to note:

- The spacing between the center of the pins is 5/16"
- The width between the 2 metal "tabs" is 3/4" (max width of the plug)
- The pins are approximately 3/8" deep from pin tip to base of pins
- with the cover on, it is 11/16" from the back of the cover to the base of the pins
- The opening on the back cover for the power cord is 1/2" (H) x 11/16" (W)

Let me know if you need any other information.

I've included photos of the back cover and also of the set with an episode of Mary Tyler Moore Show playing.

......................................

A lot of fun TV shows to think about from my youth.

In the NYC area we had

2 - WCBS (CBS)
4 - WNBC (NBC)
5 - WNEW (Metromedia)
7 - WABC (ABC)
9 - WOR (RKO - Independent)
11 - WPIX (Independent)
13 - WNET (Public Television) -> Billy Joel reference - "All your life is Channel 13"

Ch 9 had Winky Dink, Ch 11 had Captain Jack McCarthy "6 bells, 3 O Clock and all is well" was his trademark phrase.
Ch 5 had Wonderama on Sunday mornings from 8 till noon, and Soupy Sales weekday afternoons.
Ch 9 had Knicks, Rangers (and sometimes NY Nets) games, usually on tape delay.

and Channel 11 had the Yuel log (a continuous loop of a fireplace with Christmas Music) on Christmas Eve and Christmas morning.

Also BTW Chas, my wife and I have a small room off the side of the Kitchen (our Parlor) which holds period pieces from the 30s, 40s and 50s (1946 Zenith Console w Phono, The Philco TV, Chair from the 30's, Candlestick Phone and phone stand, etc. Called the room that, because that is what one side of the family called their living rooms.

Good times indeed !


Attached Files Image(s)
       


Messages In This Thread
RE: Power cord specifications for 52-T1612 - by winkydink - 01-31-2024, 09:49 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 71 Code 125
I jumped the gun and stand corrected.RodB — 12:53 PM
Philco 71 Code 125
Ok guys. Thanks for the input. As for AI this is why I ask the experts. Dandconant — 07:39 AM
Philco 71 Code 125
Technically, that's C-. B- is chassis ground. The resistor between chassis ground and the HV center tap makes the HV c...MrFixr55 — 11:24 PM
54C Cabinet Refinish
hello Roy, I’d follow Arran’s suggestion and use automotive gasket material, which I keep around for situations like th...radiorich — 10:22 PM
Philco 71 Code 125
This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM
Philco 71 Code 125
Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM
54C Cabinet Refinish
Roy; Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM
Philco 71 Code 125
Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM

[-]
Who's Online
There are currently 1870 online users. [Complete List]
» 1 Member(s) | 1869 Guest(s)
Avatar

>