Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Restoring Philco 38-14
#19

Mr. Fixr

Yes, about the rectifier. Though the noise, when them plug is polarized (I have just changed it) and plugged consistently with the negative of the sch (the switch) to the Neutral, is fairly low.

Transformer is indeed a low-pass filter, when it comes to the differential; with the common mode (everything differential of Hi-Frequency will create a CM at the output via the inter-winding capacitance) it is a good question if we care enough about it, as in today's devices the sole reason we do is the compliance (hence the bridge cap), and the two Y-caps at the primary winding to the chassis will take care of it, even though we cannot hear it much.
Yes, the same Hi-F input will create some of the differential output, but like you said, the transformer itself will attenuate it, plus the rectifier filter (and in theory a smaller low inductance cap in parallel to the electrolytics should help further) will kill the rest of it.

Good thing is, the second rectifier capacitane (in the LC filter) is not really limited (within reason), so the cap could be increase almost indefinitely (within reason).

In fact, I implemented a Greinacher doubler in my Telefunken (to make DC close to the one made of 220VAC), and that radio is fairly quiet.


-----------------------



Now, about the cabinet.
Whatever happened to GoJo? None of our two auto stores (Advanced A/P and Autozone; the PepBoys stopped being a store and retained only service facility) carries it anymore; they carry that orange stuff, with pumice and the one without the pumice has aloe and some other cosmetic stuff I don't care about.
I will have to order Goop or GoJo in smaller tubs online; Amazon does not even carry GoJo, only Goop.

Oh well. Seems like my hook and pick kit came.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.


Messages In This Thread
Restoring Philco 38-14 - by morzh - 09-09-2024, 07:04 PM
RE: Restoring Philco 38-14 - by morzh - 09-14-2024, 04:49 PM
RE: Restoring Philco 38-14 - by morzh - 09-15-2024, 09:30 PM
RE: Restoring Philco 38-14 - by morzh - 09-28-2024, 07:40 PM
RE: Restoring Philco 38-14 - by morzh - 09-28-2024, 09:35 PM
RE: Restoring Philco 38-14 - by morzh - 09-29-2024, 09:04 PM
RE: Restoring Philco 38-14 - by morzh - 09-30-2024, 10:23 PM
RE: Restoring Philco 38-14 - by radiorich - 10-01-2024, 12:25 AM
RE: Restoring Philco 38-14 - by morzh - 10-01-2024, 08:07 AM
RE: Restoring Philco 38-14 - by radiorich - 10-01-2024, 08:45 AM
RE: Restoring Philco 38-14 - by RodB - 10-01-2024, 10:01 AM
RE: Restoring Philco 38-14 - by morzh - 10-01-2024, 11:11 AM
RE: Restoring Philco 38-14 - by morzh - 10-01-2024, 09:15 PM
RE: Restoring Philco 38-14 - by radiorich - 10-02-2024, 09:43 AM
RE: Restoring Philco 38-14 - by morzh - 10-04-2024, 09:42 PM
RE: Restoring Philco 38-14 - by radiorich - 10-05-2024, 12:42 AM
RE: Restoring Philco 38-14 - by RadioSvit - 10-05-2024, 02:55 AM
RE: Restoring Philco 38-14 - by MrFixr55 - 10-05-2024, 08:13 AM
RE: Restoring Philco 38-14 - by morzh - 10-05-2024, 02:01 PM
RE: Restoring Philco 38-14 - by morzh - 10-05-2024, 08:52 PM
RE: Restoring Philco 38-14 - by morzh - 10-05-2024, 08:55 PM
RE: Restoring Philco 38-14 - by radiorich - 10-05-2024, 09:28 PM
RE: Restoring Philco 38-14 - by morzh - 10-05-2024, 09:57 PM
RE: Restoring Philco 38-14 - by radiorich - 10-06-2024, 03:38 PM
RE: Restoring Philco 38-14 - by morzh - 10-06-2024, 10:15 PM
RE: Restoring Philco 38-14 - by radiorich - 10-06-2024, 10:33 PM
RE: Restoring Philco 38-14 - by morzh - 10-07-2024, 08:56 AM
RE: Restoring Philco 38-14 - by morzh - 10-07-2024, 07:48 PM
RE: Restoring Philco 38-14 - by Paul Philco322 - 10-07-2024, 09:20 PM
RE: Restoring Philco 38-14 - by morzh - 10-07-2024, 09:25 PM
RE: Restoring Philco 38-14 - by morzh - 10-07-2024, 09:28 PM
RE: Restoring Philco 38-14 - by MrFixr55 - 10-07-2024, 10:57 PM
RE: Restoring Philco 38-14 - by Arran - 10-08-2024, 12:28 AM
RE: Restoring Philco 38-14 - by morzh - 10-08-2024, 08:54 AM
RE: Restoring Philco 38-14 - by RadioSvit - 10-08-2024, 01:52 PM
RE: Restoring Philco 38-14 - by morzh - 10-08-2024, 04:02 PM
RE: Restoring Philco 38-14 - by Paul Philco322 - 10-08-2024, 07:52 PM
RE: Restoring Philco 38-14 - by radiorich - 10-09-2024, 01:25 AM
RE: Restoring Philco 38-14 - by morzh - 10-09-2024, 08:22 AM
RE: Restoring Philco 38-14 - by RodB - 10-09-2024, 12:09 PM
RE: Restoring Philco 38-14 - by morzh - 10-09-2024, 01:14 PM
RE: Restoring Philco 38-14 - by MrFixr55 - 10-09-2024, 09:11 PM
RE: Restoring Philco 38-14 - by morzh - 10-09-2024, 10:49 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM

[-]
Who's Online
There are currently 978 online users. [Complete List]
» 1 Member(s) | 977 Guest(s)
Avatar

>