Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Restoring Philco 37-604C
#64

Arran

Yes, odd.
This said, one of the choke (the 2200 ohm one) quit, and it was working with overload (it is a 10mA choke that potentially saw 12-13mA current).
They might've wanted to really filter the output stage power to possibly diminish hum (I am yet to find out what it is) and so they used a separate LC with a lower DCR/higher current capacity choke, but they might've also wanted to decouple the output from the RF/OSC stage, so they used two.

Talking about odd: using the battery for the 1st Audio bias, how'bout it?

And yes, the bushing is, I think, a phenolic-impregnated fiber. So my nylon one should work just fine.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.


Messages In This Thread
Restoring Philco 37-604C - by morzh - 10-08-2024, 10:40 PM
RE: Restoring Philco 37-604C - by MrFixr55 - 10-09-2024, 10:30 PM
RE: Restoring Philco 37-604C - by morzh - 10-09-2024, 10:51 PM
RE: Restoring Philco 37-604C - by RodB - 10-10-2024, 09:50 AM
RE: Restoring Philco 37-604C - by morzh - 10-10-2024, 10:12 AM
RE: Restoring Philco 37-604C - by morzh - 10-10-2024, 01:10 PM
RE: Restoring Philco 37-604C - by morzh - 10-10-2024, 08:36 PM
RE: Restoring Philco 37-604C - by RodB - 10-10-2024, 09:03 PM
RE: Restoring Philco 37-604C - by radiorich - 10-10-2024, 09:14 PM
RE: Restoring Philco 37-604C - by morzh - 10-10-2024, 09:39 PM
RE: Restoring Philco 37-604C - by Arran - 10-10-2024, 11:08 PM
RE: Restoring Philco 37-604C - by morzh - 10-11-2024, 08:58 AM
RE: Restoring Philco 37-604C - by radiorich - 10-11-2024, 09:39 AM
RE: Restoring Philco 37-604C - by morzh - 10-11-2024, 10:42 AM
RE: Restoring Philco 37-604C - by morzh - 10-11-2024, 02:25 PM
RE: Restoring Philco 37-604C - by morzh - 10-11-2024, 02:30 PM
RE: Restoring Philco 37-604C - by morzh - 10-11-2024, 07:52 PM
RE: Restoring Philco 37-604C - by Arran - 10-11-2024, 08:02 PM
RE: Restoring Philco 37-604C - by morzh - 10-11-2024, 08:15 PM
RE: Restoring Philco 37-604C - by Arran - 10-12-2024, 02:14 PM
RE: Restoring Philco 37-604C - by morzh - 10-12-2024, 02:18 PM
RE: Restoring Philco 37-604C - by Chas - 10-12-2024, 02:25 PM
RE: Restoring Philco 37-604C - by morzh - 10-12-2024, 02:40 PM
RE: Restoring Philco 37-604C - by radiorich - 10-12-2024, 02:46 PM
RE: Restoring Philco 37-604C - by morzh - 10-12-2024, 03:03 PM
RE: Restoring Philco 37-604C - by RodB - 10-12-2024, 04:08 PM
RE: Restoring Philco 37-604C - by morzh - 10-12-2024, 07:56 PM
RE: Restoring Philco 37-604C - by morzh - 10-13-2024, 02:41 PM
RE: Restoring Philco 37-604C - by Arran - 10-13-2024, 03:38 PM
RE: Restoring Philco 37-604C - by morzh - 10-13-2024, 05:32 PM
RE: Restoring Philco 37-604C - by morzh - 10-13-2024, 07:18 PM
RE: Restoring Philco 37-604C - by morzh - 10-18-2024, 10:38 PM
462ron - by 462ron - 10-19-2024, 07:29 AM
RE: Restoring Philco 37-604C - by morzh - 10-19-2024, 03:05 PM
RE: Restoring Philco 37-604C - by radiorich - 10-20-2024, 12:02 AM
462ron - by 462ron - 10-20-2024, 08:56 AM
RE: Restoring Philco 37-604C - by morzh - 10-20-2024, 10:59 AM
RE: Restoring Philco 37-604C - by morzh - 10-20-2024, 11:49 AM
RE: Restoring Philco 37-604C - by morzh - 10-20-2024, 09:12 PM
RE: Restoring Philco 37-604C - by radiorich - 10-21-2024, 01:25 AM
RE: Restoring Philco 37-604C - by Arran - 10-23-2024, 05:28 PM
RE: Restoring Philco 37-604C - by Chas - 10-23-2024, 05:46 PM
RE: Restoring Philco 37-604C - by morzh - 10-23-2024, 08:47 PM
RE: Restoring Philco 37-604C - by Arran - 10-23-2024, 11:03 PM
RE: Restoring Philco 37-604C - by MrFixr55 - 10-24-2024, 08:31 AM
RE: Restoring Philco 37-604C - by morzh - 10-24-2024, 09:12 AM
RE: Restoring Philco 37-604C - by morzh - 10-24-2024, 09:13 PM
RE: Restoring Philco 37-604C - by morzh - 10-25-2024, 09:21 PM
RE: Restoring Philco 37-604C - by radiorich - 10-26-2024, 12:45 AM
RE: Restoring Philco 37-604C - by RodB - 10-26-2024, 09:09 AM
RE: Restoring Philco 37-604C - by morzh - 10-26-2024, 10:04 AM
RE: Restoring Philco 37-604C - by morzh - 10-26-2024, 10:15 AM
RE: Restoring Philco 37-604C - by radiorich - 10-26-2024, 12:54 PM
RE: Restoring Philco 37-604C - by morzh - 10-26-2024, 02:14 PM
RE: Restoring Philco 37-604C - by radiorich - 10-26-2024, 04:07 PM
RE: Restoring Philco 37-604C - by morzh - 10-26-2024, 07:53 PM
RE: Restoring Philco 37-604C - by morzh - 10-26-2024, 08:14 PM
RE: Restoring Philco 37-604C - by radiorich - 10-26-2024, 11:56 PM
RE: Restoring Philco 37-604C - by Arran - 10-27-2024, 02:32 AM
RE: Restoring Philco 37-604C - by morzh - 10-27-2024, 10:34 AM
RE: Restoring Philco 37-604C - by morzh - 10-27-2024, 03:16 PM
RE: Restoring Philco 37-604C - by morzh - 10-29-2024, 10:22 PM
RE: Restoring Philco 37-604C - by Arran - 10-30-2024, 01:40 AM
RE: Restoring Philco 37-604C - by morzh - 10-30-2024, 09:20 AM
RE: Restoring Philco 37-604C - by Arran - 10-30-2024, 04:26 PM
RE: Restoring Philco 37-604C - by morzh - 10-30-2024, 08:02 PM
RE: Restoring Philco 37-604C - by MrFixr55 - 10-30-2024, 10:09 PM
RE: Restoring Philco 37-604C - by morzh - 10-31-2024, 07:57 AM
RE: Restoring Philco 37-604C - by MrFixr55 - 10-31-2024, 10:23 AM
RE: Restoring Philco 37-604C - by morzh - 10-31-2024, 02:30 PM
RE: Restoring Philco 37-604C - by morzh - 10-31-2024, 09:40 PM
RE: Restoring Philco 37-604C - by Arran - 11-01-2024, 02:49 PM
RE: Restoring Philco 37-604C - by morzh - 11-01-2024, 02:59 PM
RE: Restoring Philco 37-604C - by morzh - 11-01-2024, 09:03 PM
RE: Restoring Philco 37-604C - by Arran - 11-01-2024, 09:51 PM
RE: Restoring Philco 37-604C - by morzh - 11-01-2024, 09:58 PM
RE: Restoring Philco 37-604C - by morzh - 11-02-2024, 02:07 PM
RE: Restoring Philco 37-604C - by radiorich - 11-02-2024, 03:18 PM
RE: Restoring Philco 37-604C - by MrFixr55 - 11-02-2024, 09:35 PM
RE: Restoring Philco 37-604C - by morzh - 11-03-2024, 02:44 PM
RE: Restoring Philco 37-604C - by morzh - 11-05-2024, 09:39 PM
RE: Restoring Philco 37-604C - by Arran - 11-05-2024, 10:32 PM
RE: Restoring Philco 37-604C - by morzh - 11-06-2024, 08:16 AM
RE: Restoring Philco 37-604C - by radiorich - 11-06-2024, 09:13 AM
RE: Restoring Philco 37-604C - by morzh - 11-06-2024, 09:54 AM
RE: Restoring Philco 37-604C - by Arran - 11-06-2024, 05:08 PM
RE: Restoring Philco 37-604C - by morzh - 11-08-2024, 08:58 PM
RE: Restoring Philco 37-604C - by radiorich - 11-09-2024, 01:11 AM
RE: Restoring Philco 37-604C - by morzh - 11-09-2024, 03:18 PM
RE: Restoring Philco 37-604C - by Arran - 11-12-2024, 01:32 AM
RE: Restoring Philco 37-604C - by morzh - 11-12-2024, 09:14 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM

[-]
Who's Online
There are currently 954 online users. [Complete List]
» 1 Member(s) | 953 Guest(s)
Avatar

>