Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Restoring Philco 96
#10

There is a lot of confusion about caps' values.

The current sch in our repository shows the 5, 11 and 13 caps as 0.015uF.
The part numbers for 11 and 13 is 3615-E, and according to Ray's book it is 0.05uF
Same value is shown in the Riders sch.
Now the part 5 is 3615-F.
Again, our sch shows 0.015uF, Riders is 0.05uF and Ray's book shows it as...0.006uF.
Notice that this is the only 3615 series part in the book that is not a 0.05uF. Some of them have resistors etc, but all will have one or two 0.05uF cap. So I think it is an error in the book.
I will use 0.05uF.

Plus, I think the way this cap is, it is not really important there; either value will work fine.

PS. South-Eastern Antique Radio Society sourve shows 3615-F, AF as 0.05uF.
PPS. Also Chuck Schwark's Repai Bench also shows it to vbe 0.05uF.
https://philcoradio.com/repairbench/bblokcap.htm

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.


Messages In This Thread
Restoring Philco 96 - by morzh - 01-12-2025, 04:21 PM
RE: Restoring Philco 96 - by jrblasde - 01-12-2025, 05:09 PM
RE: Restoring Philco 96 - by morzh - 01-12-2025, 05:22 PM
RE: Restoring Philco 96 - by morzh - 01-12-2025, 05:48 PM
RE: Restoring Philco 96 - by morzh - 01-12-2025, 06:12 PM
RE: Restoring Philco 96 - by morzh - 01-18-2025, 04:12 PM
RE: Restoring Philco 96 - by jrblasde - 01-18-2025, 08:33 PM
RE: Restoring Philco 96 - by morzh - 01-19-2025, 03:16 PM
RE: Restoring Philco 96 - by morzh - 01-20-2025, 05:57 PM
RE: Restoring Philco 96 - by morzh - 01-25-2025, 09:38 PM
RE: Restoring Philco 96 - by RodB - 01-26-2025, 11:38 AM
RE: Restoring Philco 96 - by morzh - 01-26-2025, 12:10 PM
RE: Restoring Philco 96 - by RodB - 01-26-2025, 02:53 PM
RE: Restoring Philco 96 - by Steve Davis - 01-26-2025, 04:16 PM
RE: Restoring Philco 96 - by morzh - 01-26-2025, 09:23 PM
RE: Restoring Philco 96 - by radiorich - 01-26-2025, 10:46 PM
RE: Restoring Philco 96 - by morzh - 01-27-2025, 10:41 AM
RE: Restoring Philco 96 - by morzh - 02-01-2025, 09:22 PM
RE: Restoring Philco 96 - by Arran - 02-02-2025, 12:35 AM
RE: Restoring Philco 96 - by morzh - 02-02-2025, 01:01 AM
RE: Restoring Philco 96 - by Radioroslyn - 02-02-2025, 01:22 PM
RE: Restoring Philco 96 - by morzh - 02-02-2025, 01:29 PM
RE: Restoring Philco 96 - by morzh - 02-02-2025, 01:31 PM
RE: Restoring Philco 96 - by radiorich - 02-02-2025, 03:11 PM
RE: Restoring Philco 96 - by morzh - 02-02-2025, 07:22 PM
RE: Restoring Philco 96 - by Arran - 02-04-2025, 08:43 PM
RE: Restoring Philco 96 - by morzh - 02-08-2025, 03:34 PM
RE: Restoring Philco 96 - by morzh - 02-09-2025, 07:49 PM
RE: Restoring Philco 96 - by morzh - 02-10-2025, 08:13 PM
RE: Restoring Philco 96 - by morzh - 02-13-2025, 07:52 PM
RE: Restoring Philco 96 - by Arran - 02-13-2025, 10:56 PM
RE: Restoring Philco 96 - by jrblasde - 02-16-2025, 11:01 AM
RE: Restoring Philco 96 - by morzh - 02-16-2025, 01:04 PM
RE: Restoring Philco 96 - by jrblasde - 02-16-2025, 01:28 PM
RE: Restoring Philco 96 - by morzh - 02-16-2025, 01:42 PM
RE: Restoring Philco 96 - by Arran - 02-17-2025, 04:52 PM
RE: Restoring Philco 96 - by morzh - 02-28-2025, 06:22 PM
RE: Restoring Philco 96 - by jrblasde - 03-12-2025, 08:45 AM
RE: Restoring Philco 96 - by morzh - 03-12-2025, 10:27 AM
RE: Restoring Philco 96 - by jrblasde - 03-12-2025, 10:41 AM
RE: Restoring Philco 96 - by morzh - 03-12-2025, 10:55 AM
RE: Restoring Philco 96 - by Stan the Man - 04-01-2025, 07:12 AM
RE: Restoring Philco 96 - by morzh - 04-01-2025, 01:04 PM
RE: Restoring Philco 96 - by MrFixr55 - 04-01-2025, 02:19 PM
RE: Restoring Philco 96 - by morzh - 04-01-2025, 03:28 PM
RE: Restoring Philco 96 - by rfeenstra - 04-01-2025, 06:05 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2271 online users. [Complete List]
» 1 Member(s) | 2270 Guest(s)
Avatar

>