Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

RCA T62 is playing.....
#1

So sometime  back I posted some photos of a badly damaged in transport T62, not the tank.

I did manage to get a donor cabinet and with the help of a pal in my club we have done a full recap and check, and voila! Looks better in the final frame.

Sounds pretty good is fairly sensitive. I have only cleaned the case so not too bad, I will likely give it a feed and wax tmrw. Needed a new power cord cord and pilot bulb, and capacitors, it is a transformer driven chassis.

Here is the mess and then the completed set. Only took six years to get around to it!

https://www.flickr.com/photos/92577012@N...634927865/

Paul

Tubetalk1


Messages In This Thread
RCA T62 is playing..... - by Paul Philco322 - 02-18-2025, 05:43 PM
RE: RCA T62 is playing..... - by David - 02-18-2025, 07:48 PM
RE: RCA T62 is playing..... - by morzh - 02-18-2025, 09:07 PM



Users browsing this thread:
[-]
Recent Posts
Philco 42-345 Restoration/Repair
The thrill is gone again, thought I was close to being done with it. Well Friday it was receiving broadcast, Saturday mo...osanders0311 — 07:47 PM
Help with Supreme 599
Iam getting closer to fixing it. I bumped Up the tranny voltage to get 5v on the 80 tube. I gan get the needle to move ...daveone23 — 03:41 PM
Philco 42-345 Restoration/Repair
Hello RodB, Checking my previous post I realized you're the one with the 42-340. I replaced the string for the tuning...osanders0311 — 03:12 PM
5U4 vs 5Z4 tubes
I saw no evidence of anything going wrong. The transformer is fused already which is nice. Interestingly the 5z4 did...bridkarl — 02:37 PM
5U4 vs 5Z4 tubes
I doubt anything cooked in 30 seconds because of the oops! These are very similar tubes, and nothing but transformer re...GarySP — 02:30 PM
Restoration of the Canadian General Electric A-87
Paul Philco322.You will be keeping very busy, you may have to go back to work for a breakIcon_smile. Paul To rel...RadioSvit — 01:57 PM
5U4 vs 5Z4 tubes
I grabbed the wrong tube and put in a 5U4 tube instead of the 5Z4 - I just had the rectifier in with no other tubes. Af...bridkarl — 01:54 PM
Restoration of the Canadian General Electric A-87
After applying the filler to the entire body, I noticed that the shades of the facade and the side and top walls were ve...RadioSvit — 01:49 PM
Restoration of the Canadian General Electric A-87
You will be keeping very busy, you may have to go back to work for a break:). PaulPaul Philco322 — 01:46 PM
Restoration of the Canadian General Electric A-87
After removing the control knobs, chassis, dynamics and scale frame, I first started restoring the torn piece of veneer....RadioSvit — 01:20 PM

[-]
Who's Online
There are currently 882 online users. [Complete List]
» 1 Member(s) | 881 Guest(s)
Avatar

>