Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Gloritone 27 Radio
#29

I'm kind of late to this thread, but Buzz1151 has a 3 part restore series on the model 27:

https://www.youtube.com/watch?v=gEWXZ8hJ...3k&index=3

A little bit of extra trivia on the model 27 chassis, I have a small Radiotrope model 27 that uses the same chassis but it is upright, not upside down. You can tell by how the dial and control are on the opposite side of the cabinet.

   

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"


Messages In This Thread
Gloritone 27 Radio - by dconant - 03-01-2025, 03:36 PM
RE: Gloritone 27 Radio - by morzh - 03-01-2025, 08:38 PM
RE: Gloritone 27 Radio - by radiorich - 03-01-2025, 11:40 PM
RE: Gloritone 27 Radio - by Arran - 03-02-2025, 01:09 AM
RE: Gloritone 27 Radio - by dconant - 03-02-2025, 09:31 AM
RE: Gloritone 27 Radio - by Arran - 03-02-2025, 05:40 PM
RE: Gloritone 27 Radio - by morzh - 03-02-2025, 06:48 PM
RE: Gloritone 27 Radio - by David - 03-02-2025, 08:41 PM
RE: Gloritone 27 Radio - by Arran - 03-02-2025, 11:32 PM
RE: Gloritone 27 Radio - by radiorich - 03-03-2025, 10:02 AM
RE: Gloritone 27 Radio - by MrFixr55 - 03-03-2025, 10:41 AM
RE: Gloritone 27 Radio - by dconant - 03-03-2025, 10:51 AM
RE: Gloritone 27 Radio - by radiorich - 03-03-2025, 10:54 AM
RE: Gloritone 27 Radio - by morzh - 03-03-2025, 11:04 AM
RE: Gloritone 27 Radio - by MrFixr55 - 03-03-2025, 11:52 AM
RE: Gloritone 27 Radio - by morzh - 03-03-2025, 12:11 PM
RE: Gloritone 27 Radio - by dconant - 03-03-2025, 01:52 PM
RE: Gloritone 27 Radio - by morzh - 03-03-2025, 02:13 PM
RE: Gloritone 27 Radio - by MrFixr55 - 03-03-2025, 11:35 PM
RE: Gloritone 27 Radio - by morzh - 03-03-2025, 11:44 PM
RE: Gloritone 27 Radio - by MrFixr55 - 03-04-2025, 12:04 AM
RE: Gloritone 27 Radio - by dconant - 03-04-2025, 09:42 AM
RE: Gloritone 27 Radio - by dconant - 03-08-2025, 02:31 PM
RE: Gloritone 27 Radio - by Arran - 03-08-2025, 03:29 PM
RE: Gloritone 27 Radio - by MrFixr55 - 03-11-2025, 07:35 AM
RE: Gloritone 27 Radio - by dconant - 03-11-2025, 08:19 AM
RE: Gloritone 27 Radio - by MrFixr55 - 03-11-2025, 09:11 AM
RE: Gloritone 27 Radio - by RodB - 03-11-2025, 10:20 AM
RE: Gloritone 27 Radio - by Eliot Ness - 03-12-2025, 05:48 AM
RE: Gloritone 27 Radio - by radiorich - 03-12-2025, 08:08 AM
RE: Gloritone 27 Radio - by Jim Dutridge - 03-12-2025, 02:30 PM
RE: Gloritone 27 Radio - by Eliot Ness - 03-13-2025, 10:12 PM
RE: Gloritone 27 Radio - by Arran - 03-14-2025, 12:56 AM
RE: Gloritone 27 Radio - by radiorich - 03-14-2025, 08:17 AM
RE: Gloritone 27 Radio - by dconant - 03-14-2025, 01:10 PM
RE: Gloritone 27 Radio - by Arran - 03-18-2025, 07:12 AM
RE: Gloritone 27 Radio - by MrFixr55 - 03-18-2025, 07:24 AM
RE: Gloritone 27 Radio - by dconant - 03-18-2025, 08:13 AM
RE: Gloritone 27 Radio - by dconant - 03-18-2025, 08:28 AM
RE: Gloritone 27 Radio - by MrFixr55 - 03-23-2025, 09:28 PM
RE: Gloritone 27 Radio - by radiorich - 03-23-2025, 11:07 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2204 online users. [Complete List]
» 1 Member(s) | 2203 Guest(s)
Avatar

>