Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 80 Antenna Issue?
#1

https://philcoradio.com/library/download...%20140.pdf

I’ve replaced all the caps and resistors and the radio is working but minimal volume unless I put my hand near the rear of the chassis. The radio then comes to life. I know I’m acting as an antennae but is this a sign that the antennae coil needs to be rewound? I’m not very good at troubleshooting.

Am I on the right path or what other items should I check. I realize this is simple stuff for most of the members but not for me. Any advice would be appreciated.


Messages In This Thread
Model 80 Antenna Issue? - by Hamilton - 05-18-2025, 08:24 PM
RE: Model 80 Antenna Issue? - by RodB - 05-18-2025, 08:48 PM
RE: Model 80 Antenna Issue? - by Hamilton - 05-19-2025, 10:19 AM
RE: Model 80 Antenna Issue? - by GarySP - 05-19-2025, 11:28 AM
RE: Model 80 Antenna Issue? - by Hamilton - 05-19-2025, 12:32 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
The thrill is gone again, thought I was close to being done with it. Well Friday it was receiving broadcast, Saturday mo...osanders0311 — 07:47 PM
Help with Supreme 599
Iam getting closer to fixing it. I bumped Up the tranny voltage to get 5v on the 80 tube. I gan get the needle to move ...daveone23 — 03:41 PM
Philco 42-345 Restoration/Repair
Hello RodB, Checking my previous post I realized you're the one with the 42-340. I replaced the string for the tuning...osanders0311 — 03:12 PM
5U4 vs 5Z4 tubes
I saw no evidence of anything going wrong. The transformer is fused already which is nice. Interestingly the 5z4 did...bridkarl — 02:37 PM
5U4 vs 5Z4 tubes
I doubt anything cooked in 30 seconds because of the oops! These are very similar tubes, and nothing but transformer re...GarySP — 02:30 PM
Restoration of the Canadian General Electric A-87
Paul Philco322.You will be keeping very busy, you may have to go back to work for a breakIcon_smile. Paul To rel...RadioSvit — 01:57 PM
5U4 vs 5Z4 tubes
I grabbed the wrong tube and put in a 5U4 tube instead of the 5Z4 - I just had the rectifier in with no other tubes. Af...bridkarl — 01:54 PM
Restoration of the Canadian General Electric A-87
After applying the filler to the entire body, I noticed that the shades of the facade and the side and top walls were ve...RadioSvit — 01:49 PM
Restoration of the Canadian General Electric A-87
You will be keeping very busy, you may have to go back to work for a break:). PaulPaul Philco322 — 01:46 PM
Restoration of the Canadian General Electric A-87
After removing the control knobs, chassis, dynamics and scale frame, I first started restoring the torn piece of veneer....RadioSvit — 01:20 PM

[-]
Who's Online
There are currently 930 online users. [Complete List]
» 3 Member(s) | 927 Guest(s)
AvatarAvatarAvatar

>