[klondike98]

I just received an Emerson 560 for restoration (ca 1947). The case is in very good shape with a single small hairline crack, a broken plastic chassis mount, in need of a bit of glue for the loop antenna and some polishing to remove a few blemishes.
[Image: https://www.dropbox.com/scl/fi/05it9x087...re8g&raw=1]
[Image: https://www.dropbox.com/scl/fi/9mkvfc80p...eiqx&raw=1]

It requires an Eveready 746 (4.5v) A battery and an Eveready 467 (67.5v) B battery. I was able to locate an old 746 so I could scan it and make a new label. The bonus is that I get the small/large pin connector that goes with the battery.

[Image: https://www.dropbox.com/scl/fi/vmpys7uxx...kuip&raw=1]
[Image: https://www.dropbox.com/scl/fi/blc9w6f6f...8503&raw=1]

I'm attaching the raw scan pdf of the label. If anyone wants to take a stab at cleaning it up please feel free to do it. That's not something I've attempted yet. Surprisingly the battery still has 3.9 volts although that’s with no load.