Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Returning to the Philco 48-482
#3

The new 48-482 arrived today! As promised, here are some photos of the cabinet:

   

   

   

   

The chassis inside is in fair shape as well. The top side is a bit dirty and has a couple of small rust spots (none are bigger than dime sized), but the underside is remarkably clean.

   

   

As the description said when I bought it, the tuner is pretty well frozen; it probably won’t rotate more than five to ten degrees. Perhaps I can clean it, but if not I’ll yank the tuning capacitor out of my donor set. I’ll also use the speaker out of the donor set, which I already know to work. 

I can’t help but recall a conversation I had when working on the electrical restoration of my 46-480. I had mentioned briefly that the first 48-482 I bought had a Bakelite capacitor in the power section. It was shocking to many folks to think that a late ‘40s model would have a Bakelite capacitor, so I looked at the parts list. It did not indicate that there should be any Bakelite capacitors in the power supply section of the 48-482, so I think we all decided it must have just been an available substitute. But look at this one—it has one, too!

Joseph

Philco 39-750 EZ
Philco 46-480
Philco 47-1230
Philco 48-482
Philco 49-906


Messages In This Thread
Returning to the Philco 48-482 - by jrblasde - 08-17-2025, 01:32 PM
RE: Returning to the Philco 48-482 - by bridkarl - 08-17-2025, 05:37 PM
RE: Returning to the Philco 48-482 - by jrblasde - 08-20-2025, 10:20 PM
RE: Returning to the Philco 48-482 - by Arran - 08-21-2025, 03:57 AM
RE: Returning to the Philco 48-482 - by jrblasde - 08-21-2025, 06:56 AM
RE: Returning to the Philco 48-482 - by Arran - 08-22-2025, 01:28 PM
RE: Returning to the Philco 48-482 - by MrFixr55 - 08-22-2025, 05:20 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind, even if it's a U.S.N power supply. I have a book somewhere abo...Arran — 02:56 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
hello david, I have a similar generator in my collection that features a cast iron, single-cylinder Briggs & Stratt...radiorich — 01:00 AM
under chassis parts locator diagram for 1938 Zenith 9s262
Has anyone gone to the trouble of creating an under chassis parts locator image?  Yes, I can identify components by foll...bobloney — 08:57 PM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
Try looking at this site the book mark is for a old generator that I was given. David    https://radionerds.com/index.ph...David — 08:36 PM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
Hello Everyone, I am looking for voltage identification for all the pin positions on the socket of a CRV-20130 power su...Tonym4704 — 08:16 PM
Philco P45-6365 Universal Transformer Instruction Manual
Can anyone guide me to where this may be found?GRG — 03:00 PM
54C Complete Teardown/Rebuild
I don't think that I have encountered a 12Z3 before, curious how it uses one of those but includes a #43, which is a 25 ...Arran — 02:17 PM
HiFi (Chifi) tube amp build - but my own design.
It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM
Philco 71 Code 125
Hello,  I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated.dconant — 07:57 AM

[-]
Who's Online
There are currently no members online.

>